You are here:
Forums
Sedans
Buick Lucerne
Buick Lucerne: Real World MPG

104 messages, Last post on Apr 11, 2009 at 8:01 PM
You are in the Buick Lucerne Forum. Your Hosts are pat & karens
|
|
|---|---|
|
Replying to: lane2 (Nov 23, 2008 5:30 pm) Myself, I'd just put in the plus grade and be happy. But I am a gentle driver.
|
|
|
Replying to: imidazol97 (Nov 23, 2008 5:50 pm) |
|
|
Replying to: imidazol97 (Nov 23, 2008 5:50 pm) |
|
| Just bought a used 2008, 14K miles, CXL as a Certified Used Car from the dealership and love this car. My previous one was a 1999 Regal LS, and I loved it too. The Regal was the same engine and got 24MPG. My old car broke down for the very last time just before Christmas. I did not have many choices for replacements, because dealers have kept inventories very low. My new Lucerne is only getting about 18MPG. I live in central west NJ, and the nearest gas station and town is 5 miles away in any direction. I drive 50 miles round trip to work, but have only used the car twice so far to get there. Most driving is county roads at around 50mph and highway at 70mph. What can I do to increase MPG? I have heard premium gas, new K&N filters, fuel system cleaner, and tire pressure. Is there anything else I should seriously consider? | |
| I am satisfied with my mileage on my V6 on a loaded trip to Florida I averaged 27mpg think this would have been better had I realized this engine actually gets better mileage at 70 than at 60, the last fill up was at 70 on the interstate and was 28.6 Actual, I find the computer will be high sometimes and low others and right on at times. 17-20 normal for in town driving depends on the stop lights and the duration of those lights. | |
|
|
|
I worked on the 3800 line at Buick until the last one was built which was Friday, August 22, 2008 at about 12:00pm. I ran the dept that checked each engine for faults and leaks. If an engine was rejected, I analizied the computer info and preformed the basic repairs. Sometimes the decision was a bad cylinder bore or maby a lifter bore too tight causing vibration or too loose causing an oil pressure problem. Many situations. The answer to the question on oil used during assembly is 10w30. Remember that in a mass production situation there are many variables which could result in varying fuel millage. All the testing equipment was computer controled, but also had tolerances for the 12 different tests. If an engine was pushing the limits of one or more of the tests and the computer accepted these it sent the engine out. Each engine has its own personality which was developed through machining, parts, and the assembly process and a combination of these could lead to posible lower fuel millage. Any questions just ask and maybe I can shed some light.
|
|
|
Replying to: cold_motoring (Apr 01, 2009 11:50 am) |
|
|
Replying to: cold_motoring (Apr 01, 2009 11:50 am) The supercharger uses a tiny about of oil at about 5,000 miles; maybe 1/4-1/2 pint. Engine starts instantly, does not smoke under any conditions, and pulls hard with good acceleration. I have always used Mobil 1 10/30 with Mobil 1 filter (extra fine filtration). The water pump is still good and tight and the dealer says the timing chain generally does not require replacement, even at high miles...a rarity. Fuel economy is 24-25mpg at 75-80m mph and 29-31mpg at 55-60mph. Commuting at 17 miles one way is about 21-22mpg. Shame that GM found it necessary to cease production. I had a 3.8 in a Toronado and it was also bulletproof. What a terrific engine! |
|
You are here:
Forums
Sedans
Buick Lucerne
Buick Lucerne: Real World MPG
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Buick Lucerne



Browse by Board
Browse by Topic
Today's Chats