Sign In Join 



Buick Regal Brake Problems

31 messages,  Last post on Oct 20, 2009 at 3:07 PM

You are in the Buick Regal Forum. Your Hosts are pat & karens

What is this discussion about? Buick Regal, Brakes, Sedan


Messages Page 4 of 4
1
2
3
4
Prev
Next
Last
Go To Msg #
Search This Discussion

#25 of 31
Brake light problems with regal custom by petegreb
Nov 23, 2008 (10:27 am)
Reply
I have the same problem. The brake light by the spoiler comes on but the lowers brake lights don't come on.
 
Can anyone help me?
#26 of 31
Re: Brake light problems with regal custom [petegreb] by mech21
Dec 12, 2008 (11:08 am)
Reply

Replying to: petegreb (Nov 23, 2008 10:27 am)

It could be in the turn signal switch. On our '94 Regal, if you pull the turn signal toward you slightly (stopping short of switching to high beam headlights) as you press the brake pedal, the main brake lights come on. I can't offer any tips to disassemble the steering column to fix or replace the switch...haven't tried it yet.
#27 of 31
Regal Rear Brake Issues by armes
Apr 27, 2009 (5:16 pm)
Reply
I have worked on several Regal ( 1996 ) which had premature wear and bad rotors on one or both sides. From what I have been able to determine, the problem lies with the design of the caliper slide system. All problems I discovered were related to the top caliper slide bolts. This is the one which is covered by the cap and is inset into the caliper.
 
Every vehicle which had problems had locked slides due to the top bolt being bent where the threads and shank of the bolt intersect. This bolt is too small to handle any lock up of the brakes and is even more fragile when the brakes are applied and the wheel hops on a rough road or pot hole. The sheer force of heavy brakeing appears to bend this top bolt which, once bent a little, becomes weaker with every braking and bends more until locking the slide.
 
I highly recommend replaceing all bolts when replaceing the rear pads.
#28 of 31
brake bleeding by rnutile
Sep 21, 2009 (3:34 pm)
Reply
can anyone tell me if there a sequence to follow to bleed 4 wheel disc brakes not abs i can't seem to get a pedal after bleeding them . maybe there's an order of bleeding like r-rear, then l-front, then left rear and so forth ??? please help
#29 of 31
2002 regal brake pulsation by ljlittle
Sep 22, 2009 (10:30 am)
Reply
I had complete brake job (new pads & rotors all 4 wheels) after aprox 1500 mi
experienced a bad pulsation. Rotors were removed and turned, it was ok for about
500 mi then started all over. Tech says it is the front wheel brg. is slightly loose
and this is causing the problem. He says this is a expensive job because it has
ABS. Help
#31 of 31
brake warning light by regalgs04
Oct 20, 2009 (3:07 pm)
Reply
I own a 2004 Regal GS with about 60K miles. I need to know if I can repair the device inside the brake fluid reservoir that triggers the low level switch or if I can replace the reservoir itself without removing the master cylinder. thanks in advance for any help.

Messages Page 4 of 4
1
2
3
4
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics
Advertisement