Dodge Dakota Performance and Towing Mods

46 messages, Last post on Jul 03, 2009 at 9:36 AM

You are in the Dodge Dakota Forum. Your Host is kcram

What is this discussion about? Dodge Dakota, Truck

#45 of 46 towing mods by btfreeman04 Jul 01, 2009 (6:16 pm)
i have a 2002 Dak with a 4.7, quad cab, 2wd, auto trans with 3.55 gears and 9.25 rear .it has a few mods to it nothing fancy i have a K&N cold air, and flowmaster 40 series cat back single in dual out. my question is this... we have a 23ft four winns runabout boat that weighs about 3,760lbs. (i have pulled it several times but only for a short distance but it is up quite a steep hill in ky) is there anything i can do to the rig to help it out a little to add a bit more torque? i have no tow package from factory but do have a class III hitch, i am looking at tranny coolers but dont really know which way to go, also looking at a computer chip that has different power/millage settings. thanks B
#46 of 46 Re: 08 dakota factory brake controll harness? [frustrated08] by bowdin Jul 03, 2009 (9:36 am)
Replying to: frustrated08 (Jun 23, 2009 4:11 pm) I have an 02 with the tow package. The plug was under the dashboard, to the right of the steering column. The mfr of the brake controller should be able to tell you where the plug is on an 08 Dak. Good luck.