You are here:
Forums
Hatchbacks
Mazda3
Mazda3 Climate Control Questions

155 messages, Last post on Sep 24, 2009 at 7:30 AM
You are in the Mazda3 Forum. Your Host is pf_flyer
|
Replying to: nomad93 (Jul 20, 2008 10:54 am) You can't get it to work, unfortunately. Besides, you would need a different wiring harness and sensors too. |
|
| Ok so i know this topic has been mentioned before about trying to upgrade a manual climte control to an automatic climate control on a 2007 mazda 3. I wanted to confirm one more thing, I don't care about the auto climte feature i just want to know if i try to install it will the buttons still work manually? | |
|
|
|
My dealer told me an "alert" was sent to the dealerships regarding customers complaining that the ambient air sensor (AAS) in 2010 mazda3. It seems that many customers have been complaining that the temp reading stays the same for several days regardless of the outside temp. I've found that the reading only INCREASES (this is not the case when decreasing) when you travel for 20 mph for 90 seconds and then the temp only increases 1 degree per 90 sec. This is a problem for me because I live in Miami, FL....there are very few days that I meet the requirment to change my temp! As of today I discovered that the temp changes if the car is turned off, ie: I parked my car and prior to turning it off the temp displayed is 94, 3 hours later start my car and the temp displayed is 104. After driving a few hundred yards the temp dropped a couple of degrees and with in several minutes (please keep in mind that I an not driving over 20mph for 90 seconds...the requirement to INCREASE the temp) the temp is back down to 94. So the AAS works fine if the temp needs to decrease, yet to increase the temp you have to meet the above mentioned requirements Is any one having an issue with this? If you do contact mazda customer care!!!!
|
|
|
Replying to: allycat1236 (Jul 14, 2009 2:38 pm) If my car sits in the sun for a long time...it will read 70+ degrees... (when it's 95-100 degrees outside). Then it takes about 20minutes or so for it to actually read correctly. It's kind of a pain.. but not a real big issue imo.
|
|
|
I am having a problem with my ambient outside temperature reading. Seems like it takes forever to respond to a temp change. the gauge is in the dashboard, not the mirror. Some times after a ten minute drive, the temperature does not move at all. |
|
|
|
|
Replying to: jbbevel (Jul 16, 2009 11:25 am) |
|
|
Replying to: pat (Jun 30, 2006 10:57 am)
|
|
|
Replying to: tj6968 (Sep 10, 2009 12:00 pm) |
|
You are here:
Forums
Hatchbacks
Mazda3
Mazda3 Climate Control Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Mazda MAZDA3
2009 Mazda MAZDASPEED MAZDA3



Browse by Board
Browse by Topic
Today's Chats