Sign In Join 



Mitsubishi Diamante Maintenance and Repair

82 messages,  Last post on Nov 22, 2009 at 10:17 AM

You are in the Mitsubishi Diamante Forum. Your Hosts are pat & karens

What is this discussion about? Mitsubishi Diamante, Heating / Cooling, Sedan


Messages Page 3 of 9
1
2
3
4
5
6
7
...
9
Prev
Next
Last
Go To Msg #
Search This Discussion

#17 of 82
Re: Dipping and swerving [diamoney] by Mr_Shiftright HOST
Sep 08, 2006 (7:32 am)
Reply

Replying to: diamoney (Sep 07, 2006 4:46 pm)

Well at those miles you could definitely be considering rear struts. As for the tires, you'd need a tire shop to judge how strong the sidewalls are and how good the tires are. There's only a few ways the rear of the car can move around like that---weak sidewalls, worn struts, or some really loose bushings in the rear suspension (something fairly obvious).
#18 of 82
'94' mitsubishi diamante car stereo code by jefany4
Nov 05, 2006 (5:21 am)
Reply
i bought this mitsu dia 94 with an infiniti car stereo(factory installed),when i turn it on it keeps asking for a code or it wont work...............i dont have a clue as to removing it for a serial number........any help on this
#19 of 82
Re: '94' mitsubishi diamante car stereo code [jefany4] by Mr_Shiftright HOST
Nov 05, 2006 (8:37 am)
Reply

Replying to: jefany4 (Nov 05, 2006 5:21 am)

You'll have to ask the Mitsu dealer but you may be out of luck on this because it's so old...or if you can find the seller ask them if they wrote the code down somewhere in the owner's manual.
#20 of 82
'94' mitsubishi diamante car stereo code by littlestsqaw
Nov 27, 2006 (7:26 am)
Reply
I am having the same problom and mitsubishi diamante did not come with owner's manual so what i do
#21 of 82
Broken Front Bolt by cumbiamo
Dec 12, 2006 (6:59 am)
Reply
Have a 94 Diamante with 156 K bought with 17K on it. One of the bolts from the front tire has broken off and needs to be replaced. The shop says it will be $90 for putting in a $4 bolt. Is this something I can do myself. I know it involves taking the caliper off ? Not worked on cars before but with Xmas trying to save. Thanks
#22 of 82
93' Mitsubishi diamante start then wont start by misty25
Dec 20, 2006 (9:06 am)
Reply
I have a 93 Mitsubishi diamante and the other day I was getting ready to leave for work and the car stated the shut off then the same again then it just kept turning over but not starting so i waited a few minutes tried it aging it stared then shut off. Later that night when I got home I tried it again and it stared just fine today as well but I don't know what the problem is and i don't know how to find out. I only payed 500 for the car to start with so I don't want to spend more than that just to diagnose it so if anyone has any suggestions please let me know.
#23 of 82
Re: Check Engine Light for Diamante 2002 [diamoney] by 88oldscutlassc
Dec 24, 2006 (6:34 pm)
Reply

Replying to: diamoney (Sep 05, 2006 12:53 pm)

Front rotors are generaly an easy job on any car for any backyard mechanic.How much did the heater core job cost,mine just went on a 2002 Diamante.It has about 53k miles.
#24 of 82
Re: 93' Mitsubishi diamante start then wont start [misty25] by rockinout88
Jan 04, 2007 (8:02 am)
Reply

Replying to: misty25 (Dec 20, 2006 9:06 am)

Ok i have a similar car, i dont know whether yours is DOHC or SOHC but i doubt that makes a difference. To solve my problem I had to change the battery and altenator.
#25 of 82
Re: '94' mitsubishi diamante car stereo code [littlestsqaw] by rockinout88
Jan 04, 2007 (8:09 am)
Reply

Replying to: littlestsqaw (Nov 27, 2006 7:26 am)

I have a 93 model... i took the time to call the dealership to find out how to get the code. You will laugh at this, they want you to take it to the nearest dealership and pay 45 bucks to take out the stereo to get the code, or you could take out the whole dash unit to get the serial number on top of the stereo unit and call it and then they will give you the code
#26 of 82
Re: '94' mitsubishi diamante car stereo code [rockinout88] by jefany4
Jan 04, 2007 (10:40 am)
Reply

Replying to: rockinout88 (Jan 04, 2007 8:09 am)

you dont need remove the dash to get the stereo out........remove cent coin tray by shifter then 2 screws in the hole,then side of center console screws..then move shifter back as fas as can then stereo should be removable......find parts number and call mits. dealer get parts dept. and tell parts dept. the stereo part number and they will give you the code!

Messages Page 3 of 9
1
2
3
4
5
6
7
...
9
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement