You are here:
Forums
Sedans
Chevrolet Cavalier
Chevrolet Cavalier: Head Gasket Issues

58 messages, Last post on Oct 09, 2009 at 7:36 AM
You are in the Chevrolet Cavalier Forum. Your Hosts are pat & karens
|
Replying to: valvex (Jun 28, 2006 5:18 pm) I would do just like I said, easier to strip the head on the bench and build it back up on the bench. The 98 on had a new style air induction and valve cover and other changes, it is still the same engine just some upgrades. The 97 should have the valve cover with length wise ridges, the 98 on the valve cover is smooth. My truck with the 99 2.2 has the smooth cover.
|
|
|
Replying to: gonogo (Jun 29, 2006 8:42 am) |
|
|
|
|
I recently had the Head replaced on my 1995 Chevrolet Cavalier. After replacement the engine while in gear ran rough and made some funny noises. So I took it back to the shop that day. They had found that an injector was bad and replaced it at no charge. The engine now runs great while not in gear as well as on the highway, however at slow accelerations (low speeds) there is some minor to medium vibration. Once I increase my acceleration rate the vibration goes away. I am looking at DIM but do not know where to begin. Before the head was replaced this vibration did not occur. On a side note I had the Head Gasket replaced (under warranty) in 1998 |
|
|
Replying to: pat (Jun 22, 2005 9:51 am) I would like to talk about 2.2L Corsica but no format exist on this web site. Do you have any solution? Thanx |
|
|
Replying to: mandi77 (Jun 21, 2005 11:01 am) |
|
|
Replying to: valvex (Jun 28, 2006 5:18 pm)
|
|
Does the 2.2 or 2.4 98 chevy cavalier have the oil dipstick on the front of the engine w/the dip stick on it?
|
|
|
Replying to: joe471 (Feb 06, 2007 2:27 pm) |
|
|
Replying to: joe471 (Feb 06, 2007 2:02 pm) |
|
You are here:
Forums
Sedans
Chevrolet Cavalier
Chevrolet Cavalier: Head Gasket Issues
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2005 Chevrolet Cavalier



Browse by Board
Browse by Topic
Today's Chats