- #1049 of 1087
-
Re: Dual Exhaust SXT -Xtec [xtec]
by batista
-
Jul 05, 2007 (1:52 pm)
-
|
|
Replying to: xtec (Jul 05, 2007 1:39 pm)
Discontinued as well.
Thanks again for looking.
|
- #1050 of 1087
-
Re: Dual Exhaust SXT -Xtec [batista]
by xtec
-
Jul 09, 2007 (11:51 am)
-
|
|
Replying to: batista (Jul 05, 2007 1:52 pm)
I found the dual exhaust system for $395 at exhaustdepot.com The part #cd-dcv6.I was looking at Dodgeforum.com,and thats where some of the people got theirs.The phone number is on the site.Give them a try and see if they have it.Good Luck.
|
- #1051 of 1087
-
Re: Dual Exhaust SXT -Xtec [xtec]
by batista
-
Jul 09, 2007 (4:04 pm)
-
|
|
Replying to: xtec (Jul 09, 2007 11:51 am)
I found this set-up too loud. Did you listen to the clip?
It's a true dual aluminum instead of your one muffler split into 2 resonators (stainless steel) which is better.
It sounds a bit too much like a import civic with a fart can exhaust.
Will wait for the borla if it comes back on the market.
|
- #1052 of 1087
-
Re: Dual Exhaust SXT -Xtec [batista]
by xtec
-
Jul 09, 2007 (8:23 pm)
-
|
|
Replying to: batista (Jul 09, 2007 4:04 pm)
It had a nice sound, but I do like mine,and it didn't look like the mounts would be like the Mopar/Borla setup.It looks like glass packs,where my Borla looks like a regular muffler.I'll keep searching and hope we can find one for you.I know you would be pleased.
|
- #1053 of 1087
-
Re: Dual Exhaust SXT -Xtec [xtec]
by batista
-
Jul 11, 2007 (11:39 am)
-
|
|
Replying to: xtec (Jul 09, 2007 8:23 pm)
xtec-finally purchased the mopar exhaust (82209611) and waiting for delivery.
I purchased online from authentic dodge at $389.95.
That's a good price and looking forward to the sound/look.
|
- #1054 of 1087
-
Re: Dual Exhaust SXT -Xtec [batista]
by xtec
-
Jul 11, 2007 (2:35 pm)
-
|
|
Replying to: batista (Jul 11, 2007 11:39 am)
All right,i'm glad you found it.Thats not a bad price.You will be very happy when you get it installed.The Chrome tips looks good,and the car has a more muscle look to it.I hope you can get it installed at a good price.Let me know when its done.Good Luck.
|
- #1055 of 1087
-
xtec-Question about Synthetic Oil
by batista
-
Jul 11, 2007 (3:13 pm)
-
|
I just received the mopar/borla order from UPS and will have it installed tomorrow. I was told one hour labor which will cost $95.
I had my oil changed yesterday with Quaker State full synthetic 10W30 which the 3.5L requires. Now my car idles at approx. 750 rpms and before it used to idle at 600 rpms.
I don't have the AC on and yet it still higher even after the car is fully warmed.
Do you know why that is?
|
- #1056 of 1087
-
Transmission Leak O-ring
by batista
-
Jul 11, 2007 (3:17 pm)
-
|
xtec-Have you had the transmission leak?
Mine started last week after I noticed a small puddle at work. Its a minor fix and took 30 mins at the dealership.
After the fix I still had a few drops this morning.
I guess the tech didn't clean the transmission pan.
|
- #1057 of 1087
-
Re: xtec-Question about Synthetic Oil [batista]
by xtec
-
Jul 11, 2007 (6:10 pm)
-
|
|
Replying to: batista (Jul 11, 2007 3:13 pm)
Thats where mine idles at,750.I don't know how long you waited since your last oil change,but it shows me that your engine is breaking in,and has less resistance which is good.Synthetic is suppose to have better lubrication then standard oil.I use regular oil from the dealer,but I have it changed every 3 months,and it has about 500 to 700 miles on the change.Wow you got your system fast.$95 is not bad deal.Let me know how you like it,Good luck again.
|
- #1058 of 1087
-
Re: Transmission Leak O-ring [batista]
by xtec
-
Jul 11, 2007 (8:35 pm)
-
|
|
Replying to: batista (Jul 11, 2007 3:17 pm)
I haven't seen any leaks on my floor yet,but will have the dealer look at that on my next oil change.Thanks for giving me the heads up.
|