Sign In Join 



Pontiac Aztek Liftgate Problems

15 messages,  Last post on Jan 08, 2008 at 11:44 AM

You are in the Pontiac Aztek Forum. Your Hosts are steve_ & tidester

What is this discussion about? Pontiac Aztek, Electrical, SUV


Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion

#11 of 15
Re: New liftgate problems [boots4kicks] by ray80
Aug 31, 2007 (1:10 am)
Reply

Replying to: boots4kicks (Aug 30, 2007 5:45 pm)

Have them remove fuse #28 in the underhood fuse box for about 30 seconds, then replace and try key fob or cabin switch again ( or remove negataive battery cable for same amount of time and try again). If that doesn't work there may a problem with wiring connector that is underneath vehicle just behind drivers seat.
#12 of 15
LIFTGATE BEING A PAIN by jackmindi
Jan 07, 2008 (2:07 am)
Reply
I CAN HEAR THE PASSENGERS SIDE CLICKING AND IT WILL UNLOCK BUT THE DRIVERS SIDE DOES NOTHING,WHAT CAN I DO TO GET IT OPEN.
#13 of 15
Re: LIFTGATE BEING A PAIN [jackmindi] by boots4kicks
Jan 07, 2008 (6:17 am)
Reply

Replying to: jackmindi (Jan 07, 2008 2:07 am)

I had problems with my liftgate for awhile too. My instrument panel started acting up in the dash recently so I needed to go get that fixed as well. When that got fixed, my liftgate opens now!! I had a new computer put in, something along the lines of a new body control module, and it was under the automatic shifter. It cost around $450 or so. Now everything is fine.
#14 of 15
Re: LIFTGATE BEING A PAIN [jackmindi] by ray80
Jan 08, 2008 (9:08 am)
Reply

Replying to: jackmindi (Jan 07, 2008 2:07 am)

There is something on each side that releases the liftgate, if one of them isn't working, its not going to be real easy to correct. I tried to fine how to get into the thing but I can't find the info as of yet. Basicly you have to climb into the back and remove the panel that covers the taligate (bottom part). I think the way to do it is to use special tool they have for trim removal (or use what ever you can I guess) to carefully loosen panel from tabs on top and (again I think) remove screws that hold it on on the bottom. That will allow access to mechanism and you can do what you have to from there. I'll post again if I can find more on procedure and what to look for when you get there.
#15 of 15
Re: LIFTGATE BEING A PAIN [ray80] by boots4kicks
Jan 08, 2008 (11:44 am)
Reply

Replying to: ray80 (Jan 08, 2008 9:08 am)

I still have my rear bottom tailgate panel pulled off because that was where the auto mechanic started to look when I had the problem. Until my Body Control Module was replaced, I was told I could pull both wires on the two black bulky things underneath the panel and it would open. Also, the mechanic broke the panel so I still have to replace it. Wish there would've been an easier way to take it off.

Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement