Sign In Join 



Ford Ranger Starting Problems

188 messages,  Last post on Nov 14, 2009 at 2:23 PM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Truck


Messages Page 4 of 19
1
2
3
4
5
6
7
...
19
Prev
Next
Last
Go To Msg #
Search This Discussion

#28 of 188
Re: 1995 Ford Ranger [harley8] by fordtech
Feb 02, 2007 (2:26 pm)
Reply

Replying to: harley8 (Feb 02, 2007 12:43 pm)

So how do you know its getting gas? Can it fill a quart jar in less than 30sec? How bout checking compression?
 
Check your air filter... IAC might have a problem, can you pull the plugs and they are wet?
#29 of 188
Re: 1995 Ford Ranger [fordtech] by harley8
Feb 03, 2007 (11:44 am)
Reply

Replying to: fordtech (Feb 02, 2007 2:26 pm)

can you pull the plugs and they are wet? Dry
  How bout checking compression? I put my finger in the plug hole and turned it over (it blows my finger out pretty good) :o)
 Can it fill a quart jar in less than 30sec? Pressure release valve (fu le)under the hood you open it and gas comes out, it real good
#30 of 188
Re: 1995 Ford Ranger [fordtech] by harley8 by harley8
Feb 03, 2007 (11:50 am)
Reply
When this first started... The truck would just die. You would let it sit and try again it would start. Then it would just die.Let it sit. Then it would start. Then it died and has never started again ?
#31 of 188
Re: 1995 Ford Ranger [fordtech] by harley8 [harley8] by fordtech
Feb 03, 2007 (3:13 pm)
Reply

Replying to: harley8 (Feb 03, 2007 11:50 am)

What size engine is this again? I tried to find it but couldnt...
#32 of 188
Re: 1995 Ford Ranger [fordtech] by harley8 [harley8] [fordtech] by harley8
Feb 03, 2007 (3:43 pm)
Reply

Replying to: fordtech (Feb 03, 2007 3:13 pm)

Sorry 3.0 6 cyl. standerd
#33 of 188
Re: 1995 Ford Ranger [fordtech] by harley8 [harley8] by hubbles
Apr 02, 2007 (3:43 pm)
Reply

Replying to: harley8 (Feb 03, 2007 11:50 am)

I'm having what sounds like the exact same problem with my 2000 ranger (4.0L V6). Did you ever find a solution to this problem? (Starting, then sputtering and stalling out, particularly in cold weather)
 
Thanks,
Hubbles
#34 of 188
1994 Ford ranger Starter by mhillier
Jun 16, 2007 (3:54 am)
Reply
Ok I got in the truck this morning to go to work -started the truck - the truck started but the starter did not stop trying to crank. I turned the key to the off position and the starter still ran... I attempted to pull the battery cable off but then it stopped. Did this twice before I gave up and used my wifes car to get to work. Very puzzled.... Where do I start.
 
Thank you.
#35 of 188
Re: 1994 Ford ranger Starter [mhillier] by bolivar
Jun 16, 2007 (10:36 pm)
Reply

Replying to: mhillier (Jun 16, 2007 3:54 am)

-Bad starter.
 
-Bad solonid. Aren't they separate on Fords? On the left inner fender?
 
I don't know if Autozone, etc can check a solonid...
#36 of 188
ANTI THEFT RESET by electraglide1
Jul 05, 2007 (7:17 pm)
Reply
PULLED A COUPLE OF FUSES AND PUT BACK IN NOW EVERY THING WORKS BUT WILL NOT TURN OVER OR EVEN CLICK . SOME SAID ITS ANITI THEFT DEAL , CAN THIS BE RESET
 
                        THANKS 06GLIDE1
#37 of 188
ranger shuts off by dino62
Aug 15, 2007 (1:36 pm)
Reply
4.0 SOHC, Almost every time i turn on my vehicle it turns off, the rpms wont go past 1000 anymore. I have to press on the gas for the truck to stay at 1000 rpms in order for me to drive. I've already changed the throttle body sensor, and i didn't feel a difference.

Messages Page 4 of 19
1
2
3
4
5
6
7
...
19
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement