Sign In Join 



Ford Ranger Starting Problems

188 messages,  Last post on Nov 14, 2009 at 2:23 PM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Truck


Messages Page 19 of 20
1
...
14
15
16
17
18
19
20
Prev
Next
Last
Go To Msg #
Search This Discussion

#173 of 188
Re: 98 ranger starting issues [freezejc73] by fosselfuel
Jul 16, 2009 (8:24 am)
Reply

Replying to: freezejc73 (Jun 02, 2009 2:38 pm)

Hi, I am experiencing the exact same problem with my '91 Ranger. I replaced the starter with a brand new one and it still wouldn't turn over. Just a loud click every time I turned the ignition key. I'm about to replace the starter relay because I'm guessing that's the problem, but I wanted to check and see how you resolved your starting issue - if at all. Thanks.
#174 of 188
ranger wont start by dims
Jul 16, 2009 (8:28 am)
Reply
My 95 ranger 2wd extra cab w/ manual 4 cylinder wont start. first I thought I might have turned the key to far to acc. and left the ignition on over night & drained the battery. But that wasn't it. it bump starts fine and re-started for awhile then stopped altogehter. Tested battery "Good", Alternator "Good", Replaced 9 yr old starter.( for piece of mind), and fender wall mounted seleniod. Now instead of a weak clicking sound theres a strong knocking sound from my starter, But still no start... I also checked all my fuses.... I need help
#175 of 188
Re: 98 ranger starting issues [fosselfuel] by abunoon
Jul 16, 2009 (9:01 am)
Reply

Replying to: fosselfuel (Jul 16, 2009 8:24 am)

After sinking alot of money into parts thinking it was those, we realized the timing was off. Now it runs great. All i can say is the only money that was worth it was the $30.00 on a book on Rangers from the auto parts store.
#176 of 188
Re: 94 Ranger Starting Problems [warozz] by dirtyhands67
Jul 17, 2009 (8:23 pm)
Reply

Replying to: warozz (May 24, 2009 6:22 am)

I have a '93 3.0 liter with similar trouble.
I beleive the problem may lie in the power distribution box.possibly in the contacts for the relay or grounding. i'm going to try cleaning the contacts with contact cleaner and oxy-acetylene torch tip cleaners.i will let you know if this helps.
 
My truck is having intermittent fuel pump failure.I have swapped relays,changed fuel filter & fuel pump.Still having the same problem.If the problem is in the fuel pump relay contacts in the power distribution box then changing/swapping relays won't fix the trouble. The contacts may be dirty/corroded or become a loose fit.
 
I hope this works, it seems there are a lot of rangers with similar problems.
 
If any one knows or has any other ideas please reply. thanks
#177 of 188
Re: Ford Ranger Won't Start [mosleygh] by huntlu
Jul 20, 2009 (10:14 am)
Reply

Replying to: mosleygh (Jan 13, 2007 3:55 pm)

had the same problem with my 1994 replaced the fuel relays worked like a charm.
#178 of 188
starting problem 1998 ranger by rhsm
Jul 30, 2009 (9:28 pm)
Reply
I keep blowing the fuse for the natural safety switch when starting. I have replaced the netuarl safety switch, starter &.ignition swicth. It will start a few times then the fuse will blow no matter what amp fuse I put in any ideas this a 1998 Ranger 4cyl with Manual tarnsmission With 233480 miles I also replaced the battery & starter relay
#179 of 188
97 Ranger won't start by pikeless
Aug 05, 2009 (4:50 pm)
Reply
Truck began to start about half the time; other half only a click when key was turned. Replaced solenoid on fender wall and all was good for about 1-2 dozen starts. Then 1 turn of the key got the "click" response; after that another 10 or so good starts before total failure to start with only a click response. Replaced the replacement solenoid with no success. Jumping the solenoid yields the click but nothing else. Apparently there is sufficient charge in battery-lights etc are strong. What should I check/replace next? Thanks for your help.
#180 of 188
Re: 97 Ranger won't start [pikeless] by bolivar
Aug 06, 2009 (1:05 am)
Reply

Replying to: pikeless (Aug 05, 2009 4:50 pm)

If the battery is truly strong, the first thing I would check is the battery cables.
 
Both of them.
 
Connections on both ends.
 
Check for corrision inside the insulation.
#181 of 188
Thank you Bolivar-it started by pikeless
Aug 06, 2009 (4:10 am)
Reply
Thanks for the advice Bolivar. I just checked the cables. I did not see any problem but I moved them to try to isolate them from any points of contact and it started a couple of times no problem. I hope this is not a red herring solution. Thanks again.
#182 of 188
Re: 91 ranger 4.0L not starting [adobesh] by adobesh
Aug 06, 2009 (9:06 am)
Reply

Replying to: adobesh (Jul 08, 2009 3:00 pm)

So i finally fixed my truck starting problem. After changing all of the electrical components(Starter, Starter relay, Ignition switch, Ignition tumbler, and Clutch safety switch), It ended up being a cracked firewall . I was told from the tranny shop that it is fairly common in the rangers ( whether thats true or not im not sure). When i pushed the clutch pedal in, it was forcing the firewall out and not reaching the safety point on the clutch safety switch. HA who woulda figured.

Messages Page 19 of 20
1
...
14
15
16
17
18
19
20
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement