You are here:
Forums
Pickups
Ford Ranger
Ford Ranger Starting Problems

188 messages, Last post on Nov 14, 2009 at 2:23 PM
You are in the Ford Ranger Forum. Your Host is kcram
|
First of all, i would like to apologize if this has been covered. I used the search but never really found my exact problem.I have a 91 Ford Ranger 4.0L 4x4. Yesterday, i went to work everything was fine. went to lunch, fine as well. After work, i went to start it and nothing. I get power when i turn the key and can compression start it. Also was able to jump the soleniod on the fender. So i replaced the soleniod and still nothing when i turn the key. I also bought a new starter and still nothing. I checked my fuses and ran my wires, everything appears to be fine. Any suggestions? Also, this may be foolish thinking, but oh well. I know my clutch is needing to be replaced. I have to push the pedal all the way to the floor and it starts to engage when only moved about a 1/4 to 1/2 inch Aaron
|
|
|
Replying to: adobesh (Jul 08, 2009 3:00 pm) Thanks, Aaron |
|
|
Replying to: bolivar (May 28, 2009 3:09 pm) |
|
|
Replying to: ranger91 (May 28, 2009 2:37 pm) |
|
|
|
| I have a 94 ford ranger with a 2.3L. Its a manual and it will turn over without issue but wont fire up. I changed the fuel filter and plugs but the same thing happens. I need suggestions please. | |
|
|
|
Replying to: freezejc73 (Jun 02, 2009 2:38 pm)
|
|
|
My 95 ranger 2wd extra cab w/ manual 4 cylinder wont start. |
|
|
Replying to: fosselfuel (Jul 16, 2009 8:24 am) |
|
|
|
|
Replying to: warozz (May 24, 2009 6:22 am) I beleive the problem may lie in the power distribution box.possibly in the contacts for the relay or grounding. i'm going to try cleaning the contacts with contact cleaner and oxy-acetylene torch tip cleaners.i will let you know if this helps. My truck is having intermittent fuel pump failure.I have swapped relays,changed fuel filter & fuel pump.Still having the same problem.If the problem is in the fuel pump relay contacts in the power distribution box then changing/swapping relays won't fix the trouble. The contacts may be dirty/corroded or become a loose fit. I hope this works, it seems there are a lot of rangers with similar problems. If any one knows or has any other ideas please reply. thanks |
|
|
Replying to: mosleygh (Jan 13, 2007 3:55 pm) |
|
You are here:
Forums
Pickups
Ford Ranger
Ford Ranger Starting Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Ford Ranger



Browse by Board
Browse by Topic
Today's Chats