- #6 of 56
-
Re: GPS FLAWS [fbrown]
by chops57
-
Sep 04, 2006 (10:42 pm)
-
|
|
Replying to: fbrown (Jun 19, 2006 6:25 pm)
My GPS also does this and I think it's the way it's supposed to be and this is fine for me. This way, you have time to move over right or left. If you look at the graphical display, it should still be accurate and show the target up a little bit farther.
|
- #7 of 56
-
Navigation DVD Version
by eabu
-
Oct 24, 2005 (7:47 am)
-
|
|
What is the current navigation DVD version? I have version 4.2 and we bought our car in August 2005. We live in an area with new developments and the dvd info is almost useless here.
|
- #8 of 56
-
Re: Navigation DVD Version [eabu]
by navguy1
-
Nov 23, 2005 (3:42 pm)
-
|
|
Replying to: eabu (Oct 24, 2005 7:47 am)
The new areas take up to a year to get added to the map database. Once the area has been added they usually test drive the roads to verify the geometry, turn restrictions, etc. Getting turn-by-turn and voice directions is no easy task, and requires lots of resources to create a system that is safe to use. 
|
- #9 of 56
-
using the navigation
by bobgail1
-
Dec 20, 2005 (6:18 am)
-
|
When I give it a vocal command, "home", the navigation responds that it cannot do it and I should delete the "poi's"
I never entered any poi. What am I supposed to do to get it to navigate to my home? (Home is programmed)
|
- #10 of 56
-
Re: using the navigation [bobgail1]
by katzjamr
-
Dec 20, 2005 (2:53 pm)
-
|
|
Replying to: bobgail1 (Dec 20, 2005 6:18 am)
if your home is programmed then in the lower left hand corner of the screen will be a small icon like a flag symbol, if you push that it will program a way to home.
|
- #11 of 56
-
Re: using the navigation [bobgail1]
by dadcat
-
Dec 23, 2005 (5:36 pm)
-
|
|
Replying to: bobgail1 (Dec 20, 2005 6:18 am)
Of the many times I have tried to say "Home" to the RX400h Nav, it has only worked perhaps 1 out of 10 times. I have also tried varying the pronuciation of home to Homeee and Homma with some limited success. What has worked is to program in a Quick Access point for the home address and say to the Nav "Quick Access 1" instead of "Home" The quick access points seem to be understood by the Nav in better than 9 out of 10 tries.
|
- #12 of 56
-
Re: using the navigation [dadcat]
by mirex
-
Dec 29, 2005 (3:27 pm)
-
|
|
Replying to: dadcat (Dec 23, 2005 5:36 pm)
After several attempts at saying "Home" my nav system finally gave me a list of chinese resteraunts. I picked one and had a great meal. Had to find my own way home.
|
- #13 of 56
-
Re: using the navigation [dadcat]
by ghwin
-
Dec 29, 2005 (7:22 pm)
-
|
|
Replying to: dadcat (Dec 23, 2005 5:36 pm)
Instead of using "Quick Access 1", can you have something like "My Home" or "Home Sweet Home". If this is possible, it might work better when there are more syllables in the voice-print to distinguish from other entries in the database.
Just a thought-- since I'm very familiar w/ Voice Recognition technology but not yet an owner.
- Greg
|
- #14 of 56
-
Re: using the navigation [ghwin]
by dadcat
-
Dec 30, 2005 (6:55 pm)
-
|
|
Replying to: ghwin (Dec 29, 2005 7:22 pm)
I tried your other phrases for Home, but it only recognizes "Home" or "Go Home". It reliably recognizes these two phrases if the climate control system is turned off and there is no other interfering noise. Under noisy conditions it just does not work reliably.
|
- #15 of 56
-
Re: using the navigation - touchscreen problem
by kap2
-
Jan 24, 2006 (7:35 am)
-
|
|
Replying to: katzjamr (Dec 20, 2005 2:53 pm)
The touch screen on my navigation system is not responding to touch. Other functions in the system continue to work, including through voice, but no functions on the screen respond to touch commands.
Any thoughts or will this require a service call.
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Hybrid Vehicles 
