- #14 of 56
-
Re: using the navigation [ghwin]
by dadcat
-
Dec 30, 2005 (6:55 pm)
-
|
|
Replying to: ghwin (Dec 29, 2005 7:22 pm)
I tried your other phrases for Home, but it only recognizes "Home" or "Go Home". It reliably recognizes these two phrases if the climate control system is turned off and there is no other interfering noise. Under noisy conditions it just does not work reliably.
|
- #15 of 56
-
Re: using the navigation - touchscreen problem
by kap2
-
Jan 24, 2006 (7:35 am)
-
|
|
Replying to: katzjamr (Dec 20, 2005 2:53 pm)
The touch screen on my navigation system is not responding to touch. Other functions in the system continue to work, including through voice, but no functions on the screen respond to touch commands.
Any thoughts or will this require a service call.
|
- #16 of 56
-
Re: using the navigation - touchscreen problem [kap2]
by katzjamr
-
Jan 24, 2006 (2:34 pm)
-
|
|
Replying to: kap2 (Jan 24, 2006 7:35 am)
what is the screen displaying when it has stopped responding. if the screen is totally blank its possible it was turned off. are you saying its frozen one one view?
|
- #17 of 56
-
Re: using the navigation - touchscreen problem [katzjamr]
by kap2
-
Jan 25, 2006 (6:37 am)
-
|
|
Replying to: katzjamr (Jan 24, 2006 2:34 pm)
The screen is not blank, although I can turn it off with the voice command. It will show any of the screens that correspond to the buttons below, but will not respond to touch. I brought it to the dealer and they are trying to figure out what to do. Sounds like a major fix is required.
Very disappointing for a vehicle with just 3,500 miles.
|
- #18 of 56
-
Re: using the navigation [dadcat]
by navguy
-
Mar 29, 2006 (3:32 pm)
-
|
|
Replying to: dadcat (Dec 23, 2005 5:36 pm)
If you look into the Navigation Quick Guide you will find some of the Voice Commands that the system will recognize. In regards to HOME try using "GO HOME" for a higher success rate. Lastly, I always recommend rolling up the windows and quieting the interior before making a command. 
|
- #19 of 56
-
Re: using the navigation [navguy]
by dadcat
-
Mar 30, 2006 (12:29 pm)
-
|
|
Replying to: navguy (Mar 29, 2006 3:32 pm)
Saying "Go Home" works poorly too. It often puts up the icons for Golf Courses when I say that, except under perfectly quiet conditions (car stopped, engine and climate control off). The voice recognition system is just not reliable under any other conditions.
|
- #20 of 56
-
Phone directory transfer
by dsilver2
-
May 06, 2006 (12:56 pm)
-
|
Has anyone been successful in trasfering the phone directory from a Motorola bluetooth phone to the car?
Thank you,
|
- #21 of 56
-
Modifying software
by stevelx400h
-
May 21, 2006 (4:26 pm)
-
|
|
Replying to: dsilver2 (May 06, 2006 12:56 pm)
I heard that I can modify the software in my RX400h so that I can dial out on the phone and enter an address in the Nav system while the car is moving. How do I do this?
|
- #22 of 56
-
Re: Phone directory transfer [dsilver2]
by stevelx400h
-
May 21, 2006 (5:23 pm)
-
|
|
Replying to: dsilver2 (May 06, 2006 12:56 pm)
Page 123 of the 2006 Lexus Nav system manual explains how to do this. The problem is that it says you can transfer the address BOOK, but with my Moto RAZR I can only transfer one phone number at a time.
|
- #23 of 56
-
Re: Phone directory transfer [stevelx400h]
by dsilver2
-
May 21, 2006 (6:20 pm)
-
|
|
Replying to: stevelx400h (May 21, 2006 5:23 pm)
Thanks for the reply. That is exactly what I found, I had no problem bonding my Moto RAZR with the car but I had to transfer one phone number at a time which is a tedious process. I also have a BMW 530xi, which automatically bonded and transfered the whole phone directory which took less than 2 minutes.
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Hybrid Vehicles 
