Sign In Join 



Chevy Silverado and GMC Sierra Interior and Dashboard

157 messages,  Last post on Nov 19, 2009 at 7:42 PM

You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram

What is this discussion about? Chevrolet C/K 1500 Series, Interior, Truck


Messages Page 8 of 16
1
...
5
6
7
8
9
10
11
...
16
Prev
Next
Last
Go To Msg #
Search This Discussion

#69 of 157
Re: 99 silverdo speed gage [jerryk2] by obyone
Dec 17, 2007 (12:07 pm)
Reply

Replying to: jerryk2 (Dec 17, 2007 6:48 am)

In 1999 there was a transition from old to new body style. If you have the new body style with the 5.3 or 4.8L motor then this cluster will work for you.
 
cluster
 
or you could try here:
 
http://www.gmpartsdirect.com
 
I also understand there there is a bulletin out and your Chevy dealer might replace it for free.
#70 of 157
Re: 99 silverdo speed gage [obyone] by jerryk2
Dec 19, 2007 (6:04 pm)
Reply

Replying to: obyone (Dec 17, 2007 12:07 pm)

where can i find the bulletin at for this let me know thanks or you can email me at champsprint31aol.com with the info thanks
#71 of 157
Re: 99 silverdo speed gage [jerryk2] by obyone
Dec 19, 2007 (6:26 pm)
Reply

Replying to: jerryk2 (Dec 19, 2007 6:04 pm)

there was a post earlier that referred to it. How true it is I don't know.
 
cluster recall
#72 of 157
Instrument Panel Cluster repair by bigz04
Dec 19, 2007 (5:20 pm)
Reply
04 Chevy. I'm on my 3rd Cluster this month! with no change. My Speedo still goes crazy at times or stays at zero. Plus the last repair on cluster the Truck's gear selector panel did not work, just have a blank screen. dealership keeps telling me that its the cluster and that they will keep ordering a new cluster until they get one that works! All fine and good but they keep my truck for half the day every time it goes in! Any one else have this same problem?????? My fear is that my local Chevy dealer don't know what they are doing on this repair.....
#73 of 157
Dashboard needs replacing by caseyboy87
Dec 22, 2007 (7:10 am)
Reply
For some reason the my dashboard directly underneath the windshield on the passenger side began to bubble and peel. Anyone know where I can get a new dash piece or somethine to replace it? Any help would be greatly appreciated.
 
Casey
#74 of 157
5.8 vortec motor miss by jerryk2
Dec 22, 2007 (7:26 pm)
Reply
when the motor is running at idle speed the rpm s go from like 800 to 300 or 400 and just jumps around only at idle speed and i have changed out both o2 sensors be for the converter so if you have any idea let me know i have not check the spark plugs yet and that is next for me to atleaset look at but the code off the service motor light says o2 sensors
#75 of 157
Re: Headrest removal [mike239] by mike239
Jan 02, 2008 (1:42 pm)
Reply

Replying to: mike239 (Dec 16, 2007 12:12 pm)

to remove the headrests there is a little hole on the side without the button if you push a paper clip into the hole and lift the headrest will come out
#76 of 157
Need some advice on Speedo/Speed sensors by bigz04
Jan 16, 2008 (8:43 am)
Reply
Okay I've had 5 yes 5 instrument panel clusters put in at my local "Parts changer" on my 2004 Z71 4x4 5.3L V8 with no luck in fixing my Speedo that only wants to work some times, half the time it will stay at zero or bounce from current speed to a lower speed. I plan on taking out my Speed Sensors in the Transfer case and cleaning them with some electric parts cleaner to see if that works, other wise its $80 for two new ones? Any one else do this repair before or have the same speedo issue? Am I going to have fluid from the transfer case come out when I un-blot these speed sensors?
#77 of 157
instrument panel by edh6207
Jan 26, 2008 (5:17 pm)
Reply
For the last 3 days. my instrument panel has been flash. it will go from security, low fuel, and battery. does anyone know the cause of this.
#78 of 157
Re: 5.8 vortec motor miss [jerryk2] by muscleheader
Feb 02, 2008 (7:49 am)
Reply

Replying to: jerryk2 (Dec 22, 2007 7:26 pm)

Jerryk2
there are 2 more O2 sensors there. If the read out keeps saying that then replace the othere two. there are 2 behind the cat and two above the cat. usualy on the the exhaust manifolds

Messages Page 8 of 16
1
...
5
6
7
8
9
10
11
...
16
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement