186 messages,
Last post on Jul 03, 2012 at 3:59 PM
You are in the
Chevrolet Silverado & GMC Sierra Forum.
What is this discussion about?
Chevrolet C/K 1500 Series, Interior, Truck
#157 of 186 Re: Solution - GMC 1500 gauges drop to zero... occasionally [darnold_007]
by darnold_007
Nov 19, 2009 (8:42 pm)
IT'S BACK...
Just over a year and a half and the problem raised it's ugly head again with the same exact symptoms.
Does anybody know if there is a recall on the instrument cluster unit that controls gauges etc. and what the details are?
#158 of 186 fuel gauge inop
by amauto
Dec 29, 2009 (9:19 am)
#159 of 186 fuel gauge inop
by amauto
Dec 29, 2009 (9:19 am)
I got a2006 gmc 3500hd with a duramax the problemI got is the gauge always reads empty Ive replaced both senders and still no luck
#160 of 186 speedo,tach,inst.lts.
by htbotdvr
Jan 04, 2010 (11:27 am)
I have a 2005 silverado my speedo would go to 0 or be wrong,now my tach is all over the range,also my inst. lts. when dimming will go full bright and dim or out.
#161 of 186 SPEEDO,TACH,INSTRUMENT LIGHTS
by cleslie2006
Jan 06, 2010 (4:02 pm)
HELLO HTBOTDVR,
THE ONLY THINGS I CAN THINK OF WOULD BE TO CHECK THE MAIN HARNESS PLUG THAT
PLUGS INTO THE INSTRUMENT CLUSTER, IT COULD BE LOOSE SOME HOW. THE ONLY OTHER
THING WOULD BE ONE OF THE RELAY'S IN THE MAIN FUSE BOX IN THE ENGINE COMPARTMENT.
ONE OF THOSE COULD BE GOING OUT, OR COULD JUST HAVE SOME CORROSION ON THE CONTACTS.
PULL EACH ONE OUT AND LOOK AT THE PRONGS ON EACH ONE AND MAKE SURE THEY'RE CLEAN.
I HOPE THIS HELPS YOU IN SOME WAY, GOOD LUCK.........ANY QUESTIONS, LET ME KNOW.
THANKS,
MR IMPALA (CLESLIE2006)
Feb 05, 2010 (7:50 pm)
i have an 89 silverado but i want to swap my dash cluster for a 94 so it will have the RPM gauge... what will it take? wat do i have to do?
#166 of 186 Language changing on dash
by ronw435
Feb 24, 2010 (12:29 pm)
I have a 2004 GMC K1500 SLT Z71 Pickup. As of late the language on the readout under the speedo has been changing on its own and will not allow me to change it back to English. Has anyone had this problem and does anyone know how to fix it?
Thanks
Ron