You are here: Forums Sedans Toyota Camry 2007 Toyota Camry Problems and Repairs

2007 Toyota Camry Problems and Repairs

4940 messages,  Last post on Nov 26, 2009 at 10:26 AM

You are in the Toyota Camry Forum. Your Hosts are pat & karens

What is this discussion about? Toyota Camry, Sedan

Messages Page 480 of 495 1 ... 477 478 479 480 481 482 483 ... 495 Prev Next Last

Go To Msg # Search This Discussion

#4782 of 4940 Location of front/rear suspension member bolts by wolfboro Apr 27, 2009 (6:57 pm)
Hi ,   I will be doing my wife's Toyota's 20K maintenance as per owner's manual (it is 2007 Camry with I-4 engine and auto-tranny ) . I am OK with most of the items except one . Manual suggests to tighten nuts&bolts on chassis , it says "front/rear suspension member retaining bolts to specified torque " .   Can anyone tell me where I should look for these bolts and torque values (if possible ) .   This site has been a good source of information . I thank all the contributors for their help . Replies to this message: 210delray (Apr 28, 2009 12:30 pm) mcdawgg (Apr 28, 2009 3:48 pm)
#4783 of 4940 Re: Location of front/rear suspension member bolts [wolfboro] by 210delray Apr 28, 2009 (12:30 pm)
Replying to: wolfboro (Apr 27, 2009 6:57 pm) You don't have to worry about this item, as it's only for cars operated under "special operating conditions," in this case meaning frequent use on unpaved (and therefore bumpy) roads. Replies to this message: mcdawgg (Apr 28, 2009 3:48 pm)
#4784 of 4940 Re: Location of front/rear suspension member bolts [210delray] by mcdawgg Apr 28, 2009 (3:48 pm)
Replying to: 210delray (Apr 28, 2009 12:30 pm) Yes, 210delray is correct. I have never done this.
#4785 of 4940 Re: 2007 Camry - possible ignition problem? [jmikesf] by mikh May 04, 2009 (8:35 pm)
Replying to: jmikesf (Aug 02, 2008 8:17 pm) I have the same problem with a 2007 camry. Did you resolve your problem? If so, please advise. thank you. Replies to this message: patty19 (May 05, 2009 5:25 am) mcdawgg (May 05, 2009 6:40 am)
#4786 of 4940 Re: 2007 Camry - possible ignition problem? [mikh] by patty19 May 05, 2009 (5:25 am)
Replying to: mikh (May 04, 2009 8:35 pm) Yes the problem has been fixed. It was the oil valve line that broke. It seems to be a common thing happening with the 2005-2007 Camry as well as the Avalons. Replies to this message: mcdawgg (May 05, 2009 6:40 am)
#4787 of 4940 Re: 2007 Camry - possible ignition problem? [patty19] by mcdawgg May 05, 2009 (6:40 am)
Replying to: patty19 (May 05, 2009 5:25 am) Only on the V6 models.
#4789 of 4940 oh but my Honda or Toyota is ASSEMBLED IN THE U.S.A. by okal May 05, 2009 (12:35 pm)
So . . . the money you spent on that car goes to Japan ,some comes back here. It is a Japanese company !   The Chrysler,Ford or GM car you buy ,especially if it is ASSEMBLED IN THE U.S.A. creates more jobs ( including NON-UNION jobs ) for AMERICANS then the Hondas,Toyotas or whatever built here. Even the AMERICAN content on the BIG 3 autos when averaged out is MORE AMERICAN then the average on a transplant. Yes afew transplants have a high American content but again it is just afew.   Not totting the BUY AMERICAN thing here just telling that these transplants are"a joke" in providing real American jobs. They provide a "token few" American jobs.   And if you purchased a forgien car BUILT OVERSEAS well you did VERY LITTLE to help your fellow AMERICAN worker.   plain and simple. Replies to this message: dmathews3 (May 05, 2009 5:32 pm) mcdawgg (May 05, 2009 8:15 pm)
#4790 of 4940 Re: oh but my Honda or Toyota is ASSEMBLED IN THE U.S.A. [okal] by dmathews3 May 05, 2009 (5:32 pm)
Replying to: okal (May 05, 2009 12:35 pm) I looked at the Prius when a friend was thinking of buying one and it said ZERO American content. I told him I hope he loses his job and he was shocked. How could I think that. I told him he must not care since a good part of his job at the city water and light company is paid for by the huge monies GM pays them for water and elec. Plus he lives in Mich. and his wife's pension is from the State of Mich. which gets a whole lot of taxes from the Big 3 and maybe a couple bucks from the local Toyota dealers. Well that scared him off and he hasn't bought anything....................yet.
#4791 of 4940 Re: oh but my Honda or Toyota is ASSEMBLED IN THE U.S.A. [okal] by mcdawgg May 05, 2009 (8:15 pm)
Replying to: okal (May 05, 2009 12:35 pm) This is not the forum to discuss this, but my '07 Camry was built in Kentucky with 75% North American content. The Ford Fusion/Milan was built in Mexico with 50% North American content. I know I am supporting more USA people with the Camry purchase.   The profits on the car (probably around 5% or less) go back to Japan. The vast majority of the cost of the Camry stays in the USA.   Now back to the Camry....

Messages Page 480 of 495 1 ... 477 478 479 480 481 482 483 ... 495 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Toyota Camry 2007 Toyota Camry Problems and Repairs