You are here: Forums Pickups Ford Ranger Ford Ranger Engine questions

Ford Ranger Engine questions

251 messages,  Last post on Nov 25, 2009 at 11:55 AM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Truck

Messages Page 24 of 25 1 ... 19 20 21 22 23 24 25 Prev Next Last

Go To Msg # Search This Discussion

#231 of 251 No power 94 ranger, 2.3 mfi by fredpettit Apr 21, 2009 (8:18 pm)
The truck ran fine then one day it felt like a fouled plug. I changed the plugs,wires,coil packs. Checked the TPS,coolant temp senser,replaced fuel filter twice. It will run like it is missing but it is'nt miss firing. It is getting rotten fuel mileage and is under powered. Sometimes it pings other times it does'nt. The check engine light comes on rarely,but it does come on every once in a while. Also it sometimes smells like it is running rich.It allways starts right up and will run forever just no power,hills are a real bummer. Replies to this message: grump1 (Apr 23, 2009 10:32 am) blk4x4 (Oct 20, 2009 5:03 am)
#232 of 251 Re: No power 94 ranger, 2.3 mfi [fredpettit] by grump1 Apr 23, 2009 (10:32 am)
Replying to: fredpettit (Apr 21, 2009 8:18 pm) Might Be Your Timming or Your ECU.
#233 of 251 1988 Ranger 4X4 2.9 V6 by timkellygpi May 16, 2009 (6:24 am)
Ok I drive 4 miles and my check engine light comes on when I get home I leave it running and put the decoder on it and when I hook it up the decoder light comes on, when I flip the test switch on it blinks 3 times then my check engine light goes out. I have decoded it for three days in a row and the same thing happens. Any ideas would be appreciated! Replies to this message: mickeymouse2 (May 16, 2009 7:17 pm)
#234 of 251 Re: 1988 Ranger 4X4 2.9 V6 [timkellygpi] by mickeymouse2 May 16, 2009 (7:17 pm)
Replying to: timkellygpi (May 16, 2009 6:24 am) You probably have a cheep code reader. I use a Snap on scanner myself. Try this; Turn engine off. plug in your code reader. Turn key to run position engine still off. (accessory position) Then test. OBD1 on that year ford sometimes my scanner tells me to then again turn key off, then back on to accessory in order to scan it.
#235 of 251 engine help by ranger_v6 Jun 11, 2009 (7:40 am)
will a 2005 3.0 v6 engine from a ranger fit in the body of a 2000 model
#236 of 251 1988 2.9 liter by jaystune Jun 21, 2009 (8:16 pm)
my ranger will not get spark! i tested the coil and it works fine can anybody help with ideas Replies to this message: yell146 (Aug 28, 2009 4:21 pm)
#237 of 251 Re: Intermittent Engine Idle Loping [khoppe] by jkolla Aug 17, 2009 (8:12 am)
Replying to: khoppe (Jun 11, 2008 6:13 am) I'm having the EXACT same problem with the same exact truck...did you have any luck correcting the problem? Replies to this message: d112103 (Aug 17, 2009 11:49 am)
#238 of 251 Re: Intermittent Engine Idle Loping [jkolla] by d112103 Aug 17, 2009 (11:49 am)
Replying to: jkolla (Aug 17, 2009 8:12 am) Pull off the wiring harness that goes to the firewall and clean the connections   , and clean up ground connections that go to the body.   I also pull out the relays and sprayed some electrical cleaner into the connectors.   Probably a bad ground, loose connection.
#239 of 251 Re: 1988 2.9 liter [jaystune] by yell146 Aug 28, 2009 (4:21 pm)
Replying to: jaystune (Jun 21, 2009 8:16 pm) did you figure it out, I have an 87 that has power to the coil but no spark
#240 of 251 cold!!! by dangeranger2 Oct 18, 2009 (4:25 pm)
i have a02 ranger 3.0 flex fuel and the temp in my city is 50 degrees and my truck is running to cold like right on the C line. i have changed out the thermostat to a 180, please help Replies to this message: bolivar (Oct 18, 2009 11:31 pm)

Messages Page 24 of 25 1 ... 19 20 21 22 23 24 25 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Ford Ranger Ford Ranger Engine questions