You are here: Forums SUVs GMC Jimmy How do I remove the doors off of my Jimmy?

How do I remove the doors off of my Jimmy?

10 messages,  Last post on Jan 19, 2007 at 4:00 PM

You are in the GMC Jimmy Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC S-15 Jimmy, GMC Jimmy, Auto Body

Messages Page 1 of 1 All Messages Displayed

Go To Msg # Search This Discussion

#1 of 10 How do I remove the doors off of my jimmy? by je101787 May 03, 2006 (4:57 pm)
I need to know how to remove the doors off of my jimmy so i can clean between them. I just boght it and its white and where the hinges are, they are very dirty and it bothers me so i want to take them off to clean them better. Replies to this message: tidester (May 03, 2006 8:36 pm) biscayne6702 (Dec 06, 2006 7:39 pm) steve_ (Dec 06, 2006 9:08 pm)
#2 of 10 Re: How do I remove the doors off of my jimmy? [je101787] by tidester HOST May 03, 2006 (8:36 pm)
Replying to: je101787 (May 03, 2006 4:57 pm) It's best to post in the main Chevy Blazer/GMC Jimmy: Problems & Solutions if you want to hear from owners.   tidester, host
#3 of 10 Re: How do I remove the doors off of my jimmy? [je101787] by biscayne6702 Dec 06, 2006 (7:39 pm)
Replying to: je101787 (May 03, 2006 4:57 pm) its not worth takeing them off just to clean them, spray a good degreaser in the jamb and spray the piss out of it. In order to remove the door you have to cut the pin and then replace the pin and bushings, this is a job for a profesional.
#4 of 10 Re: How do I remove the doors off of my jimmy? [je101787] by steve_ HOST Dec 06, 2006 (9:08 pm)
Replying to: je101787 (May 03, 2006 4:57 pm) Biscayne6702 has the best suggestion I think, although some of us can't resist a challenge.   CarSpace Photo   Mine never did really fit exactly right after that.
#5 of 10 Took them off today by possum4 Jan 14, 2007 (1:55 pm)
My bushing in my door were wearing out so i replaced them today, it was fairly simple. you buy the kit at Oreilys or wherever, it cost about 7 bucks per hinge. Best to have a buddy help you you just take the retaining washer off of each pin then simply knock the pins out. Replace them the same as you took them off. I couldnt get my spring back in though. I also didnt have to mess with the wiring harness either so you would probably have to take off your door panel. Replies to this message: repairdog (Jan 15, 2007 5:24 am)
#6 of 10 Re: Took them off today [possum4] by repairdog Jan 15, 2007 (5:24 am)
Replying to: possum4 (Jan 14, 2007 1:55 pm) Door spring tool is $15 and best way to go - auto paint shops sell them or online.
#7 of 10 Doorstop problem by dombo Jan 18, 2007 (5:24 pm)
I got into a minor accdent and my drivers door got hit the spring poped out and i cant get it back in. I was told buy the bodyshop that the wheel is so rusted that thay cant fix it.Can I just change the wheel pully so in moves agan it is verry rusty.The other guys insurance wont pay for the repair. Replies to this message: repairdog (Jan 19, 2007 3:57 am)
#8 of 10 Re: Doorstop problem [dombo] by repairdog Jan 19, 2007 (3:57 am)
Replying to: dombo (Jan 18, 2007 5:24 pm) Front door have to remove panel and unplug electrical connector, then support under door, remove (pound out with punch) the 2 door pins, door is off. Now depends on year but believe that large pin with the roller also is removable so call dealer and look it up. You need to buy new door pins and bushings also and use white litheum grease to lube. To do one door shop should be around $250 I'd guess. Door spring requires a tool to compress and safely reinstall. OR - spray penetrating oil on the wheel and get it to rotate, grease, reinstall spring with tool ($15) and go for cheap.
#9 of 10 door stop pully by dombo Jan 19, 2007 (4:00 pm)
Thanks for the info I will try it the easy way first if my micanic wants to try maybe the other guys ins will pick up the tab. Thanks agan

Messages Page 1 of 1 All Messages Displayed

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Jimmy How do I remove the doors off of my Jimmy?