You are here: Forums Hatchbacks Honda Fit Honda Fit Care - Interior & Exterior

Honda Fit Care - Interior & Exterior

113 messages,  Last post on Nov 15, 2008 at 4:48 PM

You are in the Honda Fit Forum. Your Host is pf_flyer

What is this discussion about? Honda Fit, Auto Body, Interior, Hatchback

Messages Page 2 of 12 1 2 3 4 5 6 7 ... 12 Prev Next Last

Go To Msg # Search This Discussion

#9 of 113 Exterior rubber/vinyl protectant questions by sd_driver May 05, 2006 (9:24 am)
I got some 1 Grand ERV dressing for the exterior rubber and vinyl of my Fit. I have a couple of questions because, well, up until now, caring for the exterior of my car has meant washing it occasionally.   I've noticed that it is impossible to put the dressing on the rubber/vinyl without spillover to the painted surface. (No, I'm not going to tape up my car every time I want to dress the vinyl.) Not only that, it leaves a cloudy residue that has to be buffed off.   Two questions: 1) Will the ERV harm the painted surface?   2) If I wash the car before applying the dressing, can I just remove the excess dressing when I waxand buff the car after?   BTW: I'll be using Optimum Car Wax when I wax it.
#10 of 113 Black Dust on the Rear Sill by coolchid Jun 14, 2006 (11:30 am)
When wiping down the Fit (less than 400 miles driven - both city & freeway) after an hour's drive about town, I've noticed that there is an accumulation of fine black dust on the rear sill (below the lift-gate). It almost looks like brake dust, but I know that can't be, or exhuast soot?? It does seem more concentrated on the right side. Has anybody else noticed this or have any idea where it might be coming from? Replies to this message: hungarian83 (Jun 14, 2006 11:53 am) jethaden (Jun 14, 2006 1:33 pm)
#11 of 113 Re: Black Dust on the Rear Sill [coolchid] by hungarian83 Jun 14, 2006 (11:53 am)
Replying to: coolchid (Jun 14, 2006 11:30 am) For me it appears on the window, the hatch, and the bumper. I first noticed it on a sticker I have on my rear window when the white area was covered in the dust after a few weeks without a wash.   I never really thought about the source, but I figured it would be from the high-traffic freeway driving I do on the quite crowded I-5 in southern California.
#12 of 113 Re: Black Dust on the Rear Sill [coolchid] by jethaden Jun 14, 2006 (1:33 pm)
Replying to: coolchid (Jun 14, 2006 11:30 am) I get dark soot/dust/dirt on the top of the back bumper (below hatch) where water collects and drys, leaving stuff behind. I rinse it off weekly. I would expect its collecting on back of car due to vacuum (lack of turbulence in back) while driving.
#13 of 113 Turtle Wax Ice by carfanatic007 Jun 15, 2006 (6:12 am)
It's clear, you don't have to worry about getting on the metal "Fit" emblem because it leaves no "white residue". It is easy to use and really looks great on the Black color.
#14 of 113 Re: Protectant questions [sd_driver] by frogdaddy Jun 21, 2006 (12:14 pm)
Replying to: sd_driver (Apr 28, 2006 1:54 pm) link title   Astro Shield   I've always used this. No silicones (promotes oxidation). Not a wax. Petroleum based (which I believe comes from the road to begin with no?) Polish and glaze not a wax. Probably similar to NuFinish. Non abrasive and works good with the orbital.
#15 of 113 Honda Fit Glove Cover question by doef Jul 03, 2006 (8:29 pm)
#16 of 113 Honda Fit Glove Cover question by doef Jul 02, 2006 (8:06 pm)
Hi all,   This is actually my first post in this forum. I just bought used Fit which is 2WD (GD1) in Japan. But there is significant scratch on glove cover. So I am planning to replcae it. Yes, I could find the part in auction. But the auction offers the glove cover for GD2 and GD3.   GD1: 1.3L L13A engine 2WD GD2: 1.3L L13A engine 4WD (Japan only) GD3: 1.5L L15A engine 2WD   I am wondering if they are using the same glove cover.   I really appreciate your help.   Regards. Replies to this message: hungarian83 (Jul 02, 2006 9:50 pm)
#17 of 113 Re: Honda Fit Glove Cover question [doef] by hungarian83 Jul 02, 2006 (9:50 pm)
Replying to: doef (Jul 02, 2006 8:06 pm) The glove compartment cover should be the same. I would have assumed the GD1 was a popular choice in Japan so I am not sure why they would only state "GD2 and GD3" in the auction...or why not GD4 as well? The color would be my only concern. From Honda's Japanese Fit site, it appears that there are different upholstery colors/designs on different levels of the Fit, and I don't know if that might extend to the plastics too?   Anyway, as long as you can find one that is the same color as your GD1, I think any JDM Fit glove compartment cover would work. Best of luck!
#18 of 113 Thanks by doef Jul 03, 2006 (8:29 pm)
Thanks Hungarian83.   I will bid that part.   Regards.

Messages Page 2 of 12 1 2 3 4 5 6 7 ... 12 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Hatchbacks Honda Fit Honda Fit Care - Interior & Exterior