You are here: Forums Pickups Nissan Frontier 2007 Nissan Frontier

2007 Nissan Frontier

98 messages,  Last post on Nov 15, 2009 at 9:49 AM

You are in the Nissan Frontier Forum. Your Host is kcram

What is this discussion about? Nissan Frontier, Future Vehicle, Truck

Messages Page 6 of 11 1 ... 3 4 5 6 7 8 9 ... 11 Prev Next Last

Go To Msg # Search This Discussion

#47 of 98 Taking Bed Divider/Bed Extension Out by codester Apr 30, 2007 (12:26 pm)
I bought a 2007 SE Crew Cab 4X4 Long Bed last week that included the sliding bed divider and bed extension. Can these be removed if needed? I have instructions that show how to lift the bed extension out, but that leaves the supporting brackets in the utilitrack.   Thanks Replies to this message: shadow20 (Apr 30, 2007 1:30 pm) codester (May 02, 2007 7:47 am) shadow20 (May 03, 2007 10:42 am) asa (May 03, 2007 4:02 pm)
#48 of 98 Re: Taking Bed Divider/Bed Extension Out [codester] by shadow20 Apr 30, 2007 (1:30 pm)
Replying to: codester (Apr 30, 2007 12:26 pm) you should be able to, mine came with the bed ex tender and i believe if you loosen them e nuff but not a;ll the way the hole thing should slide to the end of the bed by the tail gate, thats how i got mine out, so give it a try and let me know the outcome. Replies to this message: codester (May 02, 2007 7:47 am) shadow20 (May 03, 2007 10:42 am)
#49 of 98 Re: Taking Bed Divider/Bed Extension Out [shadow20] by codester May 02, 2007 (7:47 am)
Replying to: shadow20 (Apr 30, 2007 1:30 pm) I tried but the brackets won't slide out because the space beteween the track and the end of the bed doesn't allow enough room to slide out. Replies to this message: shadow20 (May 03, 2007 10:42 am)
#50 of 98 Re: Taking Bed Divider/Bed Extension Out [codester] by shadow20 May 03, 2007 (10:42 am)
Replying to: codester (May 02, 2007 7:47 am) did you try and call the dealer where you got the truck maybe there is a different way, i am sorry i couldn't be more help, any ways let me know , it could be that your track could have been damaged before you bought it and thats why the openings are a little too small.
#51 of 98 Re: Taking Bed Divider/Bed Extension Out [codester] by asa May 03, 2007 (4:02 pm)
Replying to: codester (Apr 30, 2007 12:26 pm) They slide out on the end against the cab wall. Tilt the end up as it comes to the end of the rail and it'll roll right out. I've had mine out several times.
#52 of 98 Hint for those thinking of buying a Frontier by zeliff May 08, 2007 (6:39 pm)
Just bought a frontier SE CC 4x4 long bed after carefully looking at Toyota and Dodge. The Frontier is the best value by far. I found a querk in the option list. The Truck Value Package gives you 4 wheel positraction via Anti lock brake fundtion. The normal Value Package does not include this and cost more money. I don't believe any other 4x4 this side of landrover does this. Can make a big difference is slick driving. Love the truck so far. Replies to this message: driver56 (May 08, 2007 7:08 pm)
#53 of 98 Re: Hint for those thinking of buying a Frontier [zeliff] by driver56 May 08, 2007 (7:08 pm)
Replying to: zeliff (May 08, 2007 6:39 pm) Congrats! I own a 07 Frontier Nismo Crew 4x4. The only other truck I seriously considered was the Tacoma SR5 4x4 with the TRD package, but preferred most everything about the Frontier, so it was easy for me in the end to decide. I've always been a bang for the buck kinda' guy, and you're are right, the value is there, no doubt.   Enjoy!
#54 of 98 undercover tonneau by driver56 May 11, 2007 (10:07 pm)
Does anyone out there have anything to say about the undercovers? I know they are light, easy to instal and remove. Im in need of a top for my 07 Frontier Crew, but don't want a canopy. Thanks Replies to this message: asa (May 14, 2007 2:39 pm) driver56 (May 14, 2007 3:39 pm)
#55 of 98 Re: undercover tonneau [driver56] by asa May 14, 2007 (2:39 pm)
Replying to: driver56 (May 11, 2007 10:07 pm) Not sure if I know what an 'undercover tonneau' is. Can you explain? I have the Nissan soft tonneau on my '06 SE Crew. Thanks. Replies to this message: driver56 (May 14, 2007 3:39 pm)
#56 of 98 Re: undercover tonneau [asa] by driver56 May 14, 2007 (3:39 pm)
Replying to: asa (May 14, 2007 2:39 pm) The Undercover is a brand name tonneau made in the U.S. Just punch in Undercover Tonneau and a web site should pop up. They're made of a composite material, very light, 58 lbs. for one that fits a full size pickup. Apparently, they are also very strong, will not warp, discolor, and are water tight.   Thanks!

Messages Page 6 of 11 1 ... 3 4 5 6 7 8 9 ... 11 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Nissan Frontier 2007 Nissan Frontier