You are here: Forums Vans & Minivans Chrysler Town & Country/Dodge Grand Caravan Chrysler Town & Country: Starting/Stalling/Idling Problems

Chrysler Town & Country: Starting/Stalling/Idling Problems

156 messages,  Last post on Oct 09, 2009 at 7:02 AM

You are in the Chrysler Town & Country/Dodge Grand Caravan Forum. Your Host is Karens

What is this discussion about? Chrysler Town and Country, Chrysler, Engine, Van

Messages Page 15 of 16 1 ... 10 11 12 13 14 15 16 Prev Next Last

Go To Msg # Search This Discussion

#136 of 156 Re: 1999 Town and Country Starting issues instrument panel shut off [nukbuk] by mark3694 Apr 29, 2009 (5:49 pm)
Replying to: nukbuk (Apr 28, 2009 5:55 am) thanks
#137 of 156 Re: 99 Chrysler T&C Limited [mjparisi] by alpinept May 14, 2009 (10:32 am)
Replying to: mjparisi (Jul 14, 2008 8:15 am) Don't know if you are still interested in this but i would love to be included. I am tired of not knowing if my van is going to leave me stranded somewhere or not. The van is my primary vehicle, and i am afraid to take it out of town in fear that i might get stranded somewhere!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#138 of 156 Re: shutting off... [roymarko] by tgarland May 17, 2009 (4:42 am)
Replying to: roymarko (Apr 06, 2008 8:38 pm) Roy,   Did you ever find out the problem. I started having this problem yesterday, I was coming up to a stop sign and my 99 Chrysler mini van stalled. I put it in neutral and restarted. It seems to happen with around town driving. Thanks,
#139 of 156 Re: t&c prob identical problem [mismaili] by mckay2 Aug 07, 2009 (8:58 pm)
Replying to: mismaili (Apr 21, 2009 6:06 pm) Hi there! Still working ok? This has caused me a great deal of stress (nothing like being stranded in the middle of nowhere with your wife and 3 kids under 6, 75 miles from home)   I am hoping to get my car home tomorrow and will be looking at replacing the instrument panel. Replies to this message: roymarko (Aug 08, 2009 5:28 am)
#140 of 156 Re: t&c prob identical problem [mckay2] by roymarko Aug 08, 2009 (5:28 am)
Replying to: mckay2 (Aug 07, 2009 8:58 pm) My good news is, it has not done this in a long time.   The bad news, I never did discover what was causing the problem...sorry...
#141 of 156 05 T&C starting problem by kablo Aug 26, 2009 (1:41 pm)
I have an 05 T&C eng. light came on the code was #2 scondary circute ignition coil is bad, I changed the coil/wires/plugs when started noticed #3 and 5 are crossed wire. I corrected the prob. then started the van still same code (code was cleared) was detected. shut off the eng. the check the wires /plugs /coil. everything was OK. started the eng. Battery light came on, dicounnected the Neg. wire from Battery, eng ran ok , so I thought Alt. is good. tyrned the eng. off , connected the neg. wire . tried to start nothing ahappened( no starter and no fire on plugs), after 3 atempt eng started and I checked the wures from alternator , I had to shut off and on 3-4 times. after ther 4th time starter did not work and no fire on plugs, too it 2 local mechanic , I was told ECM is bad , they changed it, it did not work, I too the van to Ansira chrysler dealer and I was told Skim madual which dealer said code reads the code on the key's chip (gray color keis), My van hs Blak key and has no chip in it.Iwas charged $365.00 for it and still no start then I was told I have to change the ECM (anothe $1100.00) and no garranty if it works( It was garrantied when they change the skim madual the van will work fin). Now my van is in drive way B/C I didnot want to pay more to dealer ,then hear that it is not starting and more more $ for dealer. Any clue to fix the van will be appriciated.
#142 of 156 1997 T&C Instrument Cluster Trim Removal by screwedbygm Sep 15, 2009 (6:28 pm)
Hi all, This may sound like a simple-minded request but the dashboard trim is all plastic and probably becoming extra brittle with age. I need to remove the trim around the instument cluster so as to remove it for the solder repair or replacement so widely discussed in this forum. Since I cannot see any screws, it probably just pries off but I've tried gently in several places with nothing yielding. Can someone please help out by explaining exactly how to pop this trim off without breaking it. Perhaps other members are similarly frustrated also. Replies to this message: xwesx (Sep 16, 2009 9:21 am) xwesx (Sep 16, 2009 9:34 am)
#143 of 156 Re: 1997 T&C Instrument Cluster Trim Removal [screwedbygm] by xwesx Sep 16, 2009 (9:21 am)
Replying to: screwedbygm (Sep 15, 2009 6:28 pm) A member posted the process in the "Instrument Cluster" thread. I think I kept a copy of it (I am looking now), but it involves more than just the trim around the cluster. You have to start on the bottom of the dash paneling (below the steering wheel) and work your way up. Indeed, 90% of the work is just removing all of the trim! Replies to this message: xwesx (Sep 16, 2009 9:34 am)
#144 of 156 Re: 1997 T&C Instrument Cluster Trim Removal [xwesx] by xwesx Sep 16, 2009 (9:34 am)
Replying to: xwesx (Sep 16, 2009 9:21 am) Well, darn.... I cannot find it. I downloaded a copy of the process information that the member posted, but I cannot remember his handle nor the thread in which it was posted. I did not find it in the Instrument Panel (rather than Cluster) thread.   Looking at his photos, though, all of the trim on the driver side of the dash is removed: Under the steering wheel, over it, and the bezel around the instrument cluster that includes the driver side and center air vents.
#145 of 156 Chrysler Town and Country by rcurran1015 Sep 17, 2009 (11:44 am)
My Chrysler Town and Country is acting funny when I try to start it. It acts like it doesn't want to start but it does. This just started happening recently and I was wondering what the problem would be. Replies to this message: xwesx (Sep 17, 2009 12:05 pm)

Messages Page 15 of 16 1 ... 10 11 12 13 14 15 16 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Vans & Minivans Chrysler Town & Country/Dodge Grand Caravan Chrysler Town & Country: Starting/Stalling/Idling Problems