Sign In Join 



Chrysler Town & Country: Starting/Stalling/Idling Problems

156 messages,  Last post on Oct 09, 2009 at 7:02 AM

You are in the Chrysler Town & Country/Dodge Grand Caravan Forum. Your Host is Karens

What is this discussion about? Chrysler Town and Country, Chrysler, Engine, Van


Messages Page 15 of 17
1
...
11
12
13
14
15
16
17
Prev
Next
Last
Go To Msg #
Search This Discussion

#133 of 156
Re: 1999 Town and Country Starting issues instrument panel shut off [nukbuk] by mark3694
Apr 27, 2009 (6:42 pm)
Reply

Replying to: nukbuk (Feb 16, 2009 10:57 am)

nukbuk where can i see your video comcast does not support anymore. I have been dealing with this problem for years now on my 2002 t&c and have ended up where i should have started on the internet. Thanks mark
#134 of 156
Re: 99 T&C - Flashing lights on the rear wiper buttons and AC bu [mjparisi] by mark3694
Apr 27, 2009 (6:50 pm)
Reply

Replying to: mjparisi (Jul 10, 2008 1:46 pm)

Add me to the list of class action. I have been dealing for years with this problem obviously dealerships do not use computers b/c it didn't take much searching to find that this has been an ongoing problem for years! Yet they are still clueless
Mark
#135 of 156
Re: 1999 Town and Country Starting issues instrument panel shut off [mark3694] by nukbuk
Apr 28, 2009 (5:55 am)
Reply

Replying to: mark3694 (Apr 27, 2009 6:42 pm)

Mark, here is the link to the pictures. I'm notthe original poster of the slide show, which has since been removed from the website. I was able to fix my van, but now I'm having other sensor problems that cause the car to stall out. http://ingriddijkers.com/CaravanPics
#136 of 156
Re: 1999 Town and Country Starting issues instrument panel shut off [nukbuk] by mark3694
Apr 29, 2009 (5:49 pm)
Reply

Replying to: nukbuk (Apr 28, 2009 5:55 am)

thanks
#137 of 156
Re: 99 Chrysler T&C Limited [mjparisi] by alpinept
May 14, 2009 (10:32 am)
Reply

Replying to: mjparisi (Jul 14, 2008 8:15 am)

Don't know if you are still interested in this but i would love to be included. I am tired of not knowing if my van is going to leave me stranded somewhere or not. The van is my primary vehicle, and i am afraid to take it out of town in fear that i might get stranded somewhere!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#138 of 156
Re: shutting off... [roymarko] by tgarland
May 17, 2009 (4:42 am)
Reply

Replying to: roymarko (Apr 06, 2008 8:38 pm)

Roy,
 
Did you ever find out the problem. I started having this problem yesterday, I was coming up to a stop sign and my 99 Chrysler mini van stalled. I put it in neutral and restarted. It seems to happen with around town driving.
Thanks,
#139 of 156
Re: t&c prob identical problem [mismaili] by mckay2
Aug 07, 2009 (8:58 pm)
Reply

Replying to: mismaili (Apr 21, 2009 6:06 pm)

Hi there! Still working ok? This has caused me a great deal of stress (nothing like being stranded in the middle of nowhere with your wife and 3 kids under 6, 75 miles from home)
 
I am hoping to get my car home tomorrow and will be looking at replacing the instrument panel.
#140 of 156
Re: t&c prob identical problem [mckay2] by roymarko
Aug 08, 2009 (5:28 am)
Reply

Replying to: mckay2 (Aug 07, 2009 8:58 pm)

My good news is, it has not done this in a long time.
 
The bad news, I never did discover what was causing the problem...sorry...
#141 of 156
05 T&C starting problem by kablo
Aug 26, 2009 (1:41 pm)
Reply
I have an 05 T&C eng. light came on the code was #2 scondary circute ignition coil is bad, I changed the coil/wires/plugs when started noticed #3 and 5 are crossed wire. I corrected the prob. then started the van still same code (code was cleared) was detected. shut off the eng. the check the wires /plugs /coil. everything was OK. started the eng. Battery light came on, dicounnected the Neg. wire from Battery, eng ran ok , so I thought Alt. is good. tyrned the eng. off , connected the neg. wire . tried to start nothing ahappened( no starter and no fire on plugs), after 3 atempt eng started and I checked the wures from alternator , I had to shut off and on 3-4 times. after ther 4th time starter did not work and no fire on plugs, too it 2 local mechanic , I was told ECM is bad , they changed it, it did not work, I too the van to Ansira chrysler dealer and I was told Skim madual which dealer said code reads the code on the key's chip (gray color keis), My van hs Blak key and has no chip in it.Iwas charged $365.00 for it and still no start then I was told I have to change the ECM (anothe $1100.00) and no garranty if it works( It was garrantied when they change the skim madual the van will work fin). Now my van is in drive way B/C I didnot want to pay more to dealer ,then hear that it is not starting and more more $ for dealer. Any clue to fix the van will be appriciated.
#142 of 156
1997 T&C Instrument Cluster Trim Removal by screwedbygm
Sep 15, 2009 (6:28 pm)
Reply
Hi all,
This may sound like a simple-minded request but the dashboard trim is all plastic and probably becoming extra brittle with age. I need to remove the trim around the instument cluster so as to remove it for the solder repair or replacement so widely discussed in this forum. Since I cannot see any screws, it probably just pries off but I've tried gently in several places with nothing yielding. Can someone please help out by explaining exactly how to pop this trim off without breaking it. Perhaps other members are similarly frustrated also.

Messages Page 15 of 17
1
...
11
12
13
14
15
16
17
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement