Last post on Apr 29, 2013 at 10:31 AM
You are in the Chevrolet Silverado & GMC Sierra
What is this discussion about?
Chevrolet Silverado 1500, Chevrolet Silverado 2500, Chevrolet Silverado 3500, GMC Sierra 1500, GMC Sierra 2500, GMC Sierra 3500, Heating / Cooling, Truck
#337 of 369 Re: Has this issue come up with AC/Heat [rayt2]
Oct 04, 2011 (11:11 am)
Replaced the resister on fan motor housing and resolved the problem.
$26 part at AutoZone in stock.
#338 of 369 Re: 06 gmc climate control malfunctioning [dhb4]
Oct 07, 2011 (12:38 pm)
I would recommend taking it back to your dealer for the necessary information. If you have any questions or concerns, feel free to contact us directly. Good luck on your progress!
Joey, GM Customer Service
#339 of 369 Re: 2000 1500 AC not working properly [ssgoldnugget]
Oct 18, 2011 (2:21 pm)
I received the letter but have lost it. I think I am nearing the mileage cutoff for the repair. Can you send me the link or the pdf so I can print it up and set up an appt!! It is impossible to find anywhere else on the internet....
#340 of 369 96 Chevy C1500 5.7L Heater Issues
Nov 29, 2011 (12:20 pm)
I can't get my heater to blow out hot air. In the past month I've changed the heater core, the thermostat and water pump due to separate issues but I still can't get it to blow out hot air from the vents. It does blow out cold air though. I also hear what sounds like bubbling/boiling water in the cab when I'm driving (stepping on the gas only). I really need to get this fixed before the really cold weather hits. What can I do???
#341 of 369 Re: 96 Chevy C1500 5.7L Heater Issues [c_verduzco]
Nov 29, 2011 (4:35 pm)
Sionce the heater system uses coolant to heat the air the most common cause of no heat is low coolant. When changing the thermostat, heater core, and water pump, the system needs to be topped off after the thermostat opens. If not you'll have low coolant.
#342 of 369 Re: 06 - Heater setting #5 does not work [fannotworkn]
Dec 08, 2011 (1:03 pm)
Have 2006 GMC 1500 doing same thing. One thru four works but # 5 does not. Received letter from GM last week (special Bullentin 10240) on manual temp control switch. Gm realizes theres a problem with the hvac system not working on certain blower settings and would repair this problem if taken to GMC dealership. Took my GMC to Macon Ga. dealership and was told #5 was not in the covered plan to repair. Dealership said it would cost 328.00 dollars to repair. Can anyone figure this out?
#343 of 369 Re: 06 - Heater setting #5 does not work [redge]
Dec 08, 2011 (2:00 pm)
I'm glad that you posted, Redge.
We would like to speak with the dealership to clarify a few things. Do you have an appointment already set up to have the repair done, or is your vehicle currently in at the dealership for repair? Please send us more information, including your name and contact information, the last 8 digits of your VIN and current mileage on your vehicle, and involved dealership. With this information, we will set up a case for you with Customer Assistance and will be following up for you with the dealership.
Thank you in advance,
GM Customer Service
#344 of 369 Re: 06 gmc climate control malfunctioning [dhb4]
Dec 23, 2011 (2:15 pm)
Did you ever get this fixed and what was the solution? I have a chevy tahoe 2004 and I have had this exact same problem for a couple of years now. Thanks
#345 of 369 Re: 06 gmc climate control malfunctioning [jmaimone]
Dec 23, 2011 (7:32 pm)
Yes I did, after replacing 2 of the fan control modules I replaced the wiring harness at the fan. The stock harness overheats and melts, shorting out the contacts, bad design. Not hard to change, just have to pay attention, the replacement harness wiring isn't color coded. Can't remember if I bought the new harness on Rock Auto or off of ebay, but it was like $17.00. Good luck and Merry Christmas!
#346 of 369 Have heat on Passenger Side but not Driver Side
Dec 28, 2011 (9:50 am)
I have an 2006 1500, last week hot air stopped blowing out of the driver side vents and continues to work on the passenger side. It has sporatically come back a time or two but is gone again after the truck sits for a couple hours. Any Ideas whats wrong or how to fix it?