Sign In Join 



Dodge Dakota Transmission Problems

693 messages,  Last post on Nov 28, 2009 at 12:30 PM

You are in the Dodge Dakota Forum. Your Host is kcram

What is this discussion about? Dodge Dakota, Truck


Messages Page 11 of 70
1
...
8
9
10
11
12
13
14
...
70
Prev
Next
Last
Go To Msg #
Search This Discussion

#98 of 693
Re: Dakota automatic gear shifter stuck in park [stealthb2] by bytefixer
Feb 08, 2007 (7:26 pm)
Reply

Replying to: stealthb2 (Jan 07, 2007 9:06 pm)

Hey stealthb2. I have a 2002 r/t that just started having the problem where it will not shift out of park after it has sit all night outside. Only started when temps have gotten below 15 degrees. After it warms up about 10 minutes it is ok. Sounds like might be same problem you have highlighted. Can you send me your ppt slides. You didn't mention what action is needed after you get the covers off. My email address is dsmith9comcast.net. Thanks for the help.
#99 of 693
Re: PowerPoint Pics [dodge01driver] by bytefixer
Feb 08, 2007 (8:02 pm)
Reply

Replying to: dodge01driver (Jan 20, 2007 2:00 pm)

I saw your messages between you and stealthb2. I am having a similar problem when the temps get around 10 degrees. I live in northern virginia and the temps have been below 10 every night for almost a week. Did you have success with the advice you got from steathb2?
#100 of 693
Re: PowerPoint Pics [bytefixer] by gphillippi
Feb 09, 2007 (7:38 am)
Reply

Replying to: bytefixer (Feb 08, 2007 8:02 pm)

I am having the same problem on my 2002 and would love a pass along set of slides or tips on fixing. greg.phillippixerox.com thanks!
#101 of 693
3 pin to a 5 pin neutral switch by tkavanaugh
Feb 09, 2007 (9:02 pm)
Reply
just did a eng/trans swap on a 2000 (3 pin)with a 2002 (5 pin) on the neutral switch. Now I get a check eng lite and some crazy shifting patterns and can now start it in any gear. Is there a pigtail that will adapt my wiring harness 3 Pin connector to the 5 pin switch?
#102 of 693
Re: Dakota automatic gear shifter stuck in park [bytefixer] by stealthb2
Feb 10, 2007 (10:18 am)
Reply

Replying to: bytefixer (Feb 08, 2007 7:26 pm)

Check out the pictures on my page of Edmunds. You will need to Browse Members using Dodge and Dakota as criteria. The pictures are THERE with explanations. "stealthb2"
#103 of 693
1993 dakota 5.2L 4x4 Auto Tranny not working. by dodge318
Feb 10, 2007 (6:51 pm)
Reply
I drove my truck to work and the tranny was working great not noticeable problems. I get don't work (12hrs later) and put the truck in drive and there was nothing no movement at all. I tried every gear and nothing. Is my tranny finished? or is there some sort of sensor that my be causing this problem.
thank you for your replies in advance.
 
#104 of 693
neutral safety switch by tkavanaugh
Feb 11, 2007 (7:25 pm)
Reply
Does anyone have any ideas on the difference between a 2000 dakota automatic transmission neutral switch and a 2002 switch. The 2000 has a 3 pin connector and the 2002 has a 5 pin switch. I know that the 3 pin was only a neutral safety switch, but the 5 pin has a few more features, any ideas on how to adapt my 3 pin switch plug wiring harness to the 5 pin switch so this will work the way it is suppose to ?
#105 of 693
Re: neutral safety switch [tkavanaugh] by dustyk
Feb 13, 2007 (8:45 pm)
Reply

Replying to: tkavanaugh (Feb 11, 2007 7:25 pm)

Can't tell you anything about a 2000, but the pin outs for the 2003 Transmission Range Sensoris as follows:
 
Pin 1 = Reverse Lamp circuit
Pin 2 = Instrument Panel Transmission Range Display
Pin 3 = no connection
Pin 4 = no connection
Pin 5 = Transmission Range Sensor 5vdc supply
Pin 6 = Park/Neutral starting circuit and PCM input
 
Regards,
Dusty
#106 of 693
Re: neutral safety switch [tkavanaugh] by iscort
Feb 26, 2007 (12:23 pm)
Reply

Replying to: tkavanaugh (Feb 11, 2007 7:25 pm)

Did you ever get a good answer or fix for this problem, I have a 01 dodge ram 2500 and put in a 02 tranny wnd the mechanic just grounded the neutral switch so it wouls start, it drove fine for a few months, then the computer went out not sure if the tranny cuased this but after i installed new computer the tranny has frozen or the torque converter is plugged up. thanks in advanced for your help.
#107 of 693
Re: Dakota Overdrive Whine [tyrant8499] by kd4iiw
Feb 27, 2007 (12:47 pm)
Reply

Replying to: tyrant8499 (Jan 29, 2007 8:01 am)

I am thinking about a 2006 Dakota. Any pros cons?

Messages Page 11 of 70
1
...
8
9
10
11
12
13
14
...
70
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement