Chevrolet Blazer Brake Problems

75 messages, Last post on Sep 07, 2009 at 6:45 AM

You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC, GMC Jimmy, Brakes, SUV

Outline

Messages Page 9 of 9: 1; ...; 3; 4; 5; 6; 7; 8; 9; Prev; Next; Last

#74 of 75 Re: Rear Rotor removal 2002 Blazer [jlflemmons] by lbeasley Sep 07, 2009 (1:39 am)
Replying to: jlflemmons (Sep 06, 2009 5:04 pm) Thanks for the reply. I managed to get the rotors off and replaced the rotors, calipers, and brake pads. I went out and bought a heaver hammer and had to beat the rotors pretty hard. I wasn't worried about breaking them b/c they were being replaced any ways. I took a hammer and hit both sides of the rotor inward pretty hard. After about 4 or 5 really hard wacks, they came loose. Thanks again man! Replies to this message: jlflemmons (Sep 07, 2009 6:45 am)
#75 of 75 Re: Rear Rotor removal 2002 Blazer [lbeasley] by jlflemmons Sep 07, 2009 (6:45 am)
Replying to: lbeasley (Sep 07, 2009 1:39 am) You're more than welcome. Glad it worked out (or at least your workout was productive!)

#74 of 75: Re: Rear Rotor removal 2002 Blazer [jlflemmons] by lbeasley; Sep 07, 2009 (1:39 am)

Replying to: jlflemmons (Sep 06, 2009 5:04 pm)

Thanks for the reply. I managed to get the rotors off and replaced the rotors, calipers, and brake pads. I went out and bought a heaver hammer and had to beat the rotors pretty hard. I wasn't worried about breaking them b/c they were being replaced any ways. I took a hammer and hit both sides of the rotor inward pretty hard. After about 4 or 5 really hard wacks, they came loose. Thanks again man!