You are here:
Forums
Pickups
Ford Ranger
Ford Ranger Lighting and Electrical Problems

187 messages, Last post on Dec 07, 2009 at 7:42 PM
You are in the Ford Ranger Forum. Your Host is kcram
|
|
|---|---|
|
HELLO THERE! I HAVE A 94 FORD RANGER 6 CYL AND I HAD A CLUTCH PROBLEM AND FIXED IT WITH A BUDDY OF MINE AND WHEN WE TRY TO START THE TRUCK SHE WENT DEAD. I PUT IN A NEW BATTERY, SOLENOID AND NOTHING WORKS??? JUST DEAD......... PLEASE HELP.... THANK YOU, LENNY
|
|
|
|
|
Replying to: lennyserna (Sep 10, 2008 5:50 pm) |
|
Fuses are good bulbs are good. Light dont work. Does this thing have a flasher unit? If so where? Its a 1996 ranger xlt. Any help would be great. Thanks.
|
|
|
Replying to: trigun1 (Sep 30, 2008 1:29 pm) |
|
| I dont have a owners book to tell me what fuse is the high beam but have tested all on the side of the dash, the haynes book said its #33 but i don't have a 33 so any help would be great. | |
|
My son just bought a 2000 Ranger 4wd with the 3.0. While driving the tach drops to 0 until he either guns it or stops and restarts. What should I look for and where to begin to repair this issue??? Thanks for the help. |
|
Hey got a '92 Ranger. Idiot me left the lights on one night, obiously killed the battery. I got a jump and ran it and the alternator charged it but it wouldnt start. I took it to where I got the battery they tested it and said the the battery was 12v but the CCA's were bad in it so they gave me a new one. Now I came back from hunting and this time I did not leave anything on and I go to start it and same thing. I noticed the first time my gauge was jumping all over the place but it read a steady 12v on my multimeter. This time it is jumping everywhere again but I haven't looked on the meter. Any advice?
|
|
You are here:
Forums
Pickups
Ford Ranger
Ford Ranger Lighting and Electrical Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Ford Ranger



Browse by Board
Browse by Topic
Today's Chats