Ask the Car People.SM


Ford F-Series Axle and Ratio Questions

22 messages,  Last post on May 22, 2013 at 4:14 PM

You are in the Ford F-Series Forum.

What is this discussion about? Ford F-150, Ford F-250, Ford F-350, Truck

Messages Page 3 of 3

#15 of 22 '72 F-350 long wheelbase by cayoterun

Jan 21, 2008 (8:44 pm)

Hi, new here and first post:
 
I'm needing to put the highest differential gear ratio in this truck.
Does anyone know the highest ratio available for them. I'd like as close to 3. as I can. Putting a low max rpm, high torque motor in front of it. No heavy use on it tho, just hiway use, with light loads.
Thanks,
Cayoterun

#16 of 22 Re: 5.4v8 with 3.31 axle ratio [gregkay] by want2go2

Jul 17, 2008 (8:42 pm)

Replying to: gregkay (Mar 28, 2007 1:21 pm)
Have you received any reply's on your post. I just took delivery of a 5.4 V8 F-150 and found out it has a 3.31 axle ratio. I don't know if thats good for towing about 4400 lbs Do you know if a 3.55 would be better for all around towing and regular driving. Thanks.

#17 of 22 towing ability of F150 by campman1

Jul 28, 2008 (10:30 am)

Have 2003 F150, 4.6L, rear axle ratio of 3.08...How much can I tow, e.g. a small camping trailer....what about tongue weight? Should I consider changing the axle ratio? Thanks

#18 of 22 Rear Axle Rebuild by snowbrdjnky

Apr 04, 2009 (8:53 pm)

Im not sure if this is the correct spot to put my question, but i will try it and hope for the best. I am trying and learning to rebuild my rear axil. This is the first place i thought of for help. Its off of a 1978 F 150. It has a 3rd member. I am having trouble removing the bearing on both (FORGIVE MY TERMINOLOGY) shafts going to each rear tire. there is a press on stop of some sort that i can not remove. Any any information would be greatly appriciated. On any aspect of the rebuild.

#20 of 22 9" Ford Axle spline determination by spartan74

Apr 22, 2010 (12:20 pm)

I've got a older Ford axle with 9" third member in my project car. The current gears are 4:56's and I'm wanting to switch to a 3:50. My axles are the 28 spline style and I'm searching for a salvage yard third member with those gears. My salvage yard sells complete assembled rear end and doesn't break them down just to look at spline count because at that point they can't sell as a complete assembled axle.. They've got several Ford pickups with these older 9" rear ends but don't know which ones have the 28 or 31 splines. Is there anyway to tell, without dissasembly, which axles are in each P U ?
Because of different axle widths and bearing diameters I'm not sure if any would be interchangable with my axle tube..

#21 of 22 2002 f-150 rear end by higinbotham

Sep 16, 2010 (10:24 am)

my rear end locked up on my 02 f150 and it has the 3.08 non-LS gears in it and i was wondering if the rearend would work off of a 2000 f-150 with 3.55 gears in it and would everything bolt up the same

#22 of 22 3.5L with the 3.15 rear end by hackattack5

May 22, 2013 (4:14 pm)

I noticed that in the Ford forum some guys are reporting 27 to 28 MPG on the highway with super crew F150s with the ecoboost and the 3.15 gears. I am interested in this set up because I plan to tow nothing and would love the MPG from such a nice ride. Does anyone here at Edmunds have that set up? what is your real fuel mileage?

Messages Page 3 of 3

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement