You are here:
Forums
Pickups
Ford F-Series
Ford F-Series Axle and Ratio Questions

17 messages, Last post on Jul 28, 2008 at 10:30 AM
You are in the Ford F-Series Forum. Your Host is kcram
I'm needing to change or rebuild the rear axle on my 84 F-150. Since sometimes I carry a 1500 lb slide in camper, I would like to upgrade to a F-250 rear axle and suspension. Does anyone know if this will fit right up to my F-150 frame?
|
|
|
Replying to: 4belair (Aug 16, 2006 11:07 am) |
|
|
I have a 1999 F150, with 4.6L V8, supercab, auto transmission. The code for the axle ratio is H9. When I called a Ford service dept, they told me they could only check back to 2000, but the H9 indicated a 3.55 axle ratio. I checked the owners manual and couldn't find anything. Can anyone verify the H9 is a 3.55 for a 1999? The reason I'm asking is depending on what the axle ratio is help determine how big of a travel trailer we can buy.
|
|
|
|
|
Replying to: gasa765 (Mar 15, 2007 10:49 am) Should break it down to tell you what all the numbers mean along with the axle ratio: Ford VIN Decoder |
|
|
I have a ford 2006 reg cab stx package with a 4.6v8 and 3.55 axle. They are now offering a 5.4v8 with a 3.31 axle. Obviously more horsepower, but better fuel economy? how about towing comparisons? engine life, etc? Comments would be welcome. thx, -g
|
|
|
It has vari-valve timeing, electronic throttle. this gives comparable gas milage. Mark. |
|
|
I've got a 92 F350 that needs a new rear end. The axle has the following markings: B124 D 3.55 10 2 2C02 I've found a junk F250 with the floating rear end (8 lugs) same as my current rear end but markings on the end of the hub are different. The axle markings are: S125 P 3.55 10 2 7F23 Hub markings for old and new axle are: old: 5T8 CA / A55 MW new: 5T8 CA / DO DF Measurements from backing plate to backing plate and leaf spring center to leaf spring center are the same. It appears the gear ratios are the same. Does anyone know if this axle will work? |
|
|
Hi, new here and first post: I'm needing to put the highest differential gear ratio in this truck. Does anyone know the highest ratio available for them. I'd like as close to 3. as I can. Putting a low max rpm, high torque motor in front of it. No heavy use on it tho, just hiway use, with light loads. Thanks, Cayoterun |
|
|
Replying to: gregkay (Mar 28, 2007 1:21 pm) |
|
| Have 2003 F150, 4.6L, rear axle ratio of 3.08...How much can I tow, e.g. a small camping trailer....what about tongue weight? Should I consider changing the axle ratio? Thanks | |
You are here:
Forums
Pickups
Ford F-Series
Ford F-Series Axle and Ratio Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2009 Ford F-150
1999 Ford F-250
1997 Ford F-350



Browse by Board
Browse by Topic
Today's Chats