You are here: Forums Coupes & Convertibles Ford Mustang Ford Mustang Fox Body 79-93

Ford Mustang Fox Body 79-93

45 messages,  Last post on Nov 23, 2009 at 7:28 AM

You are in the Ford Mustang Forum. Your Host is claires

What is this discussion about? Ford Mustang

Messages Page 4 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

#25 of 45 Re: Need Help! [chuck91] by themole57 May 07, 2007 (6:02 pm)
Replying to: chuck91 (May 06, 2007 2:54 pm) As far as i know you should not have any trouble with that swap...driveshaft issues and radiator issues should be all that you encounter because the t-5 is standard and the c6 is automatic,so you will have to change radiators to allow for cooler lines also your original driveshaft will not work it will be a diffrent length...while your there you should really think about changing rear ends cause your 4 cylinder rear wont like the power from the 5.0...hope i helped.i just installed a 347 in my 86 fox so dont get downhearted...trust me its well worth the time and work
#27 of 45 sorry by themole57 May 07, 2007 (6:04 pm)
not a c6 tranny but your c6
#28 of 45 Contact info for good 5.0 mechanic in SE Michigan by fiveohman Jun 25, 2007 (12:21 pm)
Hey gang!   My cherry '88 5.0 LX needs some tuning-up, and some possible MAP sensor problems addressed.   Can anyone post some contact info regarding a good/honest/reputable mechanic OR shop in the SE Michigan area that is knowledgeable about 5.0's?   Thanks!   FiveOhMan Metro-Detroit Michigan
#29 of 45 92 fox body,possible clutch probs and lose power by btwrguitar Oct 21, 2007 (3:59 pm)
I have a 92 mustang 4 cylinder 5 speed,the clutch cable broke so i replaced it and had to adjust the cable. After i did that theres like a rattling noise now. Anyone familiar with this and if so how could i fix it? Secondly,i drove my car not but 2 secs ago and and in second gear at about 3500 rmp my car loses power as if im letting off the gas but im not. Anyone have any idea what it might be. Spark plugs maybe? Replies to this message: donnie90stang (May 25, 2009 8:20 am)
#31 of 45 82-85 bodyside mouldings by wildtang May 06, 2008 (8:21 pm)
I'M RESTORING AN 82 5.0 FOR MY BOSS AND THE MOULDINGS ARE WASTED, THEY ARE WARPED, BEEN PAINTED A FEW TIMES,AND ARE FULL OF CRACKS. I HAVE LOOKED EVERYWHERE,AND CANT FIND ANYBODY WHO SELLS THEM. SOMEBODY PLEASE HELP!!! Replies to this message: donnie90stang (May 06, 2009 9:35 am)
#32 of 45 88 Mustang LX Conv. by bsibila Sep 03, 2008 (5:56 pm)
I am in need of all four (4) stainless wheel trim ring for the poly type wheels on my vehicle. They are 14 inch dia. about 1 wide and are flat type. Anybody out there got them or know where I can buy them. If you can help E-Mail me wrsibjraol.com
#33 of 45 Re: FoxBodyStang79-93 [82boss] by papasam1 Oct 16, 2008 (11:46 pm)
Replying to: 82boss (Apr 01, 2006 10:06 pm) what type of questions
#34 of 45 86 mustang convertible by renegade5 Apr 29, 2009 (4:36 am)
will a door from a 86 mustang t-top work on my 86 convertible. Replies to this message: donnie90stang (May 06, 2009 9:37 am)

Messages Page 4 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Coupes & Convertibles Ford Mustang Ford Mustang Fox Body 79-93