Sign In Join 



Chevy S10 - GMC S15 and Sonoma Transmission Problems

209 messages,  Last post on Dec 07, 2009 at 2:38 PM

You are in the Chevrolet S-10 & GMC S15 Sonoma Forum. Your Host is kcram

What is this discussion about? Chevrolet S-10, GMC S-15, GMC Sonoma, Transmission, Truck


Messages Page 19 of 21
1
...
15
16
17
18
19
20
21
Prev
Next
Last
Go To Msg #
Search This Discussion

#180 of 209
Sporadic Shifting Problems by nucorman
Apr 03, 2009 (2:09 pm)
Reply
I recently bought a 2000 GMC sonoma 2.2 with an auto. After driving on the highway for 20 miles or so, when I get in town the transmission shifts really hard from 1st to 2nd. It also feels like the throttle is hanging a little bit. If i shut the truck off and restart it the problem goes away. It doesn't happen all the time, just every now and then. I have had the trans fluid changed and replaced the TPS sensor and am still having the problem. I would appreciate any help....
 
thanks
#181 of 209
Re: Sporadic Shifting Problems [nucorman] by gonogo
Apr 04, 2009 (7:11 am)
Reply

Replying to: nucorman (Apr 03, 2009 2:09 pm)

Have a scan done, if it shows code PO 1870 you have worn transmission parts. This happens with high mileage 4L60 E units, when the transmission fluid gets hot from long rides.
#182 of 209
4L60 E transmissions by pinky6
Apr 04, 2009 (11:59 am)
Reply
That's what's happening to my S10, I had it checked out by a transmission specialist, it's not sending out a code, but it has the same sporatic not shifting into 3rd gear problem. Another easy way to tell, just look at/smell your transmission fluid. mine is black and smells burnt. The one place wants $2950 to replace the transmission, but I found a place that will rebuild it for a lot less. Your fluid is supposed to be clear red, not dark and cloudy. If you go to a transmission place they have a set of vials to look at, you can compare your fluid to the vials. They guy who sold me the truck said he checked the fluid and it was fine, what he did was overfill the fluid trying to mask the problem. It didn't help any.
#183 of 209
Re: 4L60 E transmissions [pinky6] by gonogo
Apr 05, 2009 (6:35 am)
Reply

Replying to: pinky6 (Apr 04, 2009 11:59 am)

Your truck is a perfect example of some one letting it go, it will burn up the transmission. If caught early it can be repaired without complete overhaul.
#184 of 209
Re: Sporadic Shifting Problems [gonogo] by nucorman
Apr 06, 2009 (5:14 am)
Reply

Replying to: gonogo (Apr 04, 2009 7:11 am)

The only code its shown is that the TPS was bad and I replaced that, but it still acts up from time to time. The odd part is if I shut it off and turn it right back on the problem is gone. The truck has 100k miles on it. Thanks
#185 of 209
2000 s10 clutch wont engage by jdroadman
Apr 17, 2009 (12:25 pm)
Reply
Every time i press my clutch pedal and go to shift it feels like something is blocking the way. Now i cant even shift into any gears. The clutch pedal goes down and i go to shift i can feel the teeth just slipping by. I havent had to deal with a clutch too much so any comments would help
#186 of 209
1998 sonoma GMC Tranny problem by kikocal
May 11, 2009 (9:10 pm)
Reply
Drive the truck for about mile ,tranny starts to slip will not accelerate,make a complete stop ,turn truck off and start again and this time it will move and does it again....
CAN ANYONE OUT THERE HELP ME???,someone told me it was some sort of switch or something like that..
#187 of 209
99 s-10 4.3l trans problems by djslim
May 27, 2009 (8:33 am)
Reply
I have lost overdrive and reverse. When I drive it now it shifts real high and real hard. I have heard that it could be the shift module or it needs to be rebuilt. I really dont have the money to rebuild it. If any one has any idea please let me kno.
#188 of 209
Re: 99 s-10 4.3l trans problems [djslim] by gonogo
May 27, 2009 (8:46 am)
Reply

Replying to: djslim (May 27, 2009 8:33 am)

No reverse, not good , you need a rebuild, no way out.
#189 of 209
Re: 99 s-10 4.3l trans problems [gonogo] by djslim
Jun 11, 2009 (8:12 am)
Reply

Replying to: gonogo (May 27, 2009 8:46 am)

Thank you, now i have to just find someone to do it. Anyone ?? I'm not payin shop labor rates!

Messages Page 19 of 21
1
...
15
16
17
18
19
20
21
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement