You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Transmission Problems

Chevy S10 - GMC S15 and Sonoma Transmission Problems

209 messages,  Last post on Dec 07, 2009 at 2:38 PM

You are in the Chevrolet S-10 & GMC S15 Sonoma Forum. Your Host is kcram

What is this discussion about? Chevrolet S-10, GMC S-15, GMC Sonoma, Transmission, Truck

Messages Page 18 of 22 1 ... 15 16 17 18 19 20 21 22 Prev Next Last

Go To Msg # Search This Discussion

#168 of 209 1996 Chevy S10 Shifter Problem by 96s10 Feb 12, 2009 (5:24 pm)
i have a 96 s10 2.4l and 5 speed and it works fine but 5th when i put in in 5th it dont do any thing what u think would go on it ? it dont make no nose when u put it in 5th all the gears work but 5th
#169 of 209 Gary by gary81 Feb 15, 2009 (9:32 am)
1999 S-10 ZR2 4x4 with auto trans. service engine soon lite comes on after about 20 minutets of highway driving Code 1780 is sent to the code reader, transmission componet is slipping what componet is slipping and this mostley happens on warm days, trans fluid has been changed truck engine temp is fine service engine soon lite resets until next trip Replies to this message: gonogo (Feb 27, 2009 9:00 am)
#170 of 209 want toi do it myself by cheftwc Feb 25, 2009 (3:26 pm)
is there an online database or shop manual where i can get help on replacing a transmission in a 1989 chevy s-10 2wd 4cyl pickup without buying a haynes or chiltons
#171 of 209 Re: Gary [gary81] by gonogo Feb 27, 2009 (9:00 am)
Replying to: gary81 (Feb 15, 2009 9:32 am) Usually code P0 1870, it has been reported as worn valve body and or worn pump bushing.
#172 of 209 transmission on 96 S10, doesn't want to go into 3rd gear by pinky6 Feb 28, 2009 (3:29 pm)
I just bought a 96 S10. Auto trans. The day I had it inspected the starter died, but also I have been having problems with the transmission. It seems to be having trouble shifting into 3rd gear. It just kinds of whines and doesn't shift. I checked the transmission fluid and it is extremely overfilled. The mechanic at the garage where I bought is says the transmission is fine, but it isn't. Do you think that he overfilled the fluid to mask the problem? or is there some other reason that he would over fill it. Should I drain it? Basically, I think I've been shafted! Replies to this message: gonogo (Mar 01, 2009 7:45 am)
#173 of 209 Re: transmission on 96 S10, doesn't want to go into 3rd gear [pinky6] by gonogo Mar 01, 2009 (7:45 am)
Replying to: pinky6 (Feb 28, 2009 3:29 pm) I would drain it to the cold mark when running, printed cold right on the stick, but with it slipping, I think it burned a clutch. It takes about 15 miles of running for the hot level check.
#174 of 209 94 s-10 transmission interchange by flytesweep Mar 02, 2009 (5:18 pm)
1 have a 94 4.3 cylinder truck w/ a auto transmission.   The tranny needs rebuilding and i don't have the dough right now to take it to a shop for a rebuild. I thought i might find a used one in a salvage yard.   Here's my question: Are there any other year s-10, s-15. or blazer that will interchange? Will a 94 only fit a 94?   Your help is greatly appreciated.   Dan
#175 of 209 Time for a tranny swap. by nester111 Mar 09, 2009 (4:27 pm)
I have a 97 2wd S-10 with a 4.3. I just swapped motor with a '96 salvage motor. Now I lost reverse with the trans and she shifts real hard into 2nd. I was given a trans from a '91 S-10 with a 4.3 auto (4L60E) with low miles. Is there a way I can make this work with my truck. I was told that I might be able to swap the OBD III to OBD II and it will work. Otherwise I'll have to get the other one rebuilt. Replies to this message: gonogo (Mar 10, 2009 7:43 am)
#176 of 209 Re: Time for a tranny swap. [nester111] by gonogo Mar 10, 2009 (7:43 am)
Replying to: nester111 (Mar 09, 2009 4:27 pm) I would first check the transmission wiring for both years and see what is different. You maybe able to rewire and make it go.
#177 of 209 UMM NOISEY 5-SPEED by firerock87 Mar 16, 2009 (6:05 pm)
TrANSMISSION is noisy (really noisy), but when you push the clutch pedal in the noise goes away.im thinking throw out bearing. But with the truck in 5th gear it's normal operation. The noise goes away? That confused me. When i sit still and while the noise is present the Mph gauge jumps and fluctuates. Any Ideas Im puzzled and really need some advice

Messages Page 18 of 22 1 ... 15 16 17 18 19 20 21 22 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Transmission Problems