You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Transmission Problems

Chevy S10 - GMC S15 and Sonoma Transmission Problems

207 messages,  Last post on Oct 29, 2009 at 7:56 PM

You are in the Chevrolet S-10 & GMC S15 Sonoma Forum. Your Host is kcram

What is this discussion about? Chevrolet S-10, GMC S-15, GMC Sonoma, Transmission, Truck

Messages Page 15 of 21 1 ... 12 13 14 15 16 17 18 ... 21 Prev Next Last

Go To Msg # Search This Discussion

#138 of 207 '03 sonoma trans slipping by jugfu May 04, 2008 (6:13 pm)
I have a 2003 sonoma 2wd 2.2 litre with automatic trans. ocassionally trans will not move in 1st or reverse, feels like its slipping but will eventually catch in to gear. will not do this everytime usually when first taking off for the day. any information would be appreciated. Thanks Replies to this message: fordfan_17 (May 05, 2008 4:34 am)
#139 of 207 Re: '03 sonoma trans slipping [jugfu] by fordfan_17 May 05, 2008 (4:34 am)
Replying to: jugfu (May 04, 2008 6:13 pm) try letting your vehicle warm up before trying to shift into gears its not a fix for what we in the transmission industry call "morning sickness" but it will give you a little time to get some money saved up for an overhaul.
#140 of 207 trans swap by jugfu May 14, 2008 (8:27 am)
I have a sonoma with a 4L-60E 2wd with a four cylinder,does anyone know if the 4l60e out of a sierra or silverado would fit this truck, trans has removable bellhousing. thanks for any help Replies to this message: fordfan_17 (May 14, 2008 1:59 pm)
#141 of 207 Re: trans swap [jugfu] by fordfan_17 May 14, 2008 (1:59 pm)
Replying to: jugfu (May 14, 2008 8:27 am) what year ? since there are running changes such as pwm pump and non-pwm pump makes a difference and what year is the vehicle your getting the trans from? and what engine size will also make a difference because of calibration for instance you have a 4 cylinder and the truck has a v8.....
#142 of 207 1996 S-10 2.2L automatic shift/timing solenoid by gruszewski Jun 07, 2008 (4:03 pm)
I am getting a P1886 code (shift/timing solenoid). it shifts hard from first to second gear, and check engine light is on. i need to an e-check on vehicle to obtain plates for the truck. with the check engine light on the truck will fail automatically. can anyone help me locate this solenoid, and can i replace it or does t need to be torn down to get to the solenoid. Any help would be appreciated. the abs light also comes one once in a while for no reason. the truck has been sitting for about 7 or 8 months. thanks Replies to this message: dakotav847 (Oct 28, 2008 4:18 pm)
#143 of 207 89 Gmc s-15 bogs down by proudpapa_05 Jul 05, 2008 (2:43 pm)
My 89 Gmc s - 15 with a 2.5 litter 5 speed 2 wheel drive sputters durring shifting and when down shiffting it likes to grind in third can some one please help me on theis two things.
#144 of 207 Sonoma torque converter won't lock up by rick1999 Jul 08, 2008 (6:11 am)
I have an 01 sonoma 2.2 engine with auto trans. The problem I'm having now is that when I get on the highway the torque converter doesn't lock up like it should once I get into overdrive and the truck also will not downshift into passing gear, also when I get off the highway the trcuk is idling at 1500 rpm instead of the normal 900 rpm. If I shut the truck off and start it right back up it runs normal. It just started doing this a couple of days ago but today the check engine light came on when it did it. Any thoughts would be appreciated. Replies to this message: fordfan_17 (Jul 15, 2008 10:56 am)
#145 of 207 Re: Sonoma torque converter won't lock up [rick1999] by fordfan_17 Jul 15, 2008 (10:56 am)
Replying to: rick1999 (Jul 08, 2008 6:11 am) since the CE light came on have it scanned ill bet it comes back with a P0740 tcc performance code or a P0741 tcc stuck off....
#146 of 207 1999 chevy s-10 pickup 2.2 engine - code p1870??? by tony2x43 Jul 23, 2008 (8:30 am)
i went to motor vehicle for inspection and they told me i have code p1870 coming up on obd II. is this a transmission code? if so i am not noticing any thing wrong with trans. what is the cause of this code? Replies to this message: gonogo (Jul 23, 2008 9:46 am) tony2x43 (Jul 23, 2008 12:28 pm) gonogo (Jul 24, 2008 8:16 am)
#147 of 207 Re: 1999 chevy s-10 pickup 2.2 engine - code p1870??? [tony2x43] by gonogo Jul 23, 2008 (9:46 am)
Replying to: tony2x43 (Jul 23, 2008 8:30 am) It is for worn out parts in the transmission, yours has to be high mileage. Replies to this message: tony2x43 (Jul 23, 2008 12:28 pm) gonogo (Jul 24, 2008 8:16 am)

Messages Page 15 of 21 1 ... 12 13 14 15 16 17 18 ... 21 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Transmission Problems