You are here: Forums Pickups Ford Ranger Ford Ranger Body Accessories

Ford Ranger Body Accessories

22 messages,  Last post on Mar 15, 2009 at 5:31 PM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Truck

Messages Page 2 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

#2 of 22 Re: ford ranger radiator guard [minigunning] by lostwrench Apr 05, 2006 (4:21 pm)
Replying to: minigunning (Mar 28, 2006 11:22 am) I looked at the Rangers at the dealership and I agree. The radiator does look too exposed to debris damage. The ranger has the best fuel mileage of any pick-up sold in the USA, but who wants to be replacing radiators all the time? I would consider somehow installing some light wire fencing material or plastic netting in the openings of the front bumper.
#3 of 22 Ranger Rebuild? by northernranger Jun 21, 2006 (11:23 am)
#4 of 22 Ranger Rebuild? by northernranger Jun 21, 2006 (11:23 am)
Has anyone ever changed the cab out on a 93-97 Ranger? I am in the process and about to start and i am just wondering how big of a job this is going to be. And if any one has any pointers that would help Thanks
#5 of 22 air ride by rideindirty Jul 01, 2006 (11:06 pm)
do you know anything about installing air ride suspension on a 99 ranger? Im getting air ride for it but i want to know if i should get new lower control arms that are smaller and i dont know if i need to cut anything off the frame or not? Replies to this message: icescort (Sep 21, 2006 11:36 am)
#6 of 22 Re: air ride [rideindirty] by icescort Sep 21, 2006 (11:36 am)
Replying to: rideindirty (Jul 01, 2006 11:06 pm) Air lift company in Lansing,MI would be the best place to contact about this. You dont say if this is to be Front AND rear bags or just rear. I have done some AL kits for the rear of full size trucks. they are very good for added load capacity without killing a (relatively)smooth ride when empty.If you are looking for something to get your Ranger "up out of the weeds" when rolling and setting on the rockers when parked. I am not sure that air ride will do that for you. It is designed to suplement the stock suspension, not replace it.
#7 of 22 need help.Please by dawes Dec 04, 2006 (6:20 pm)
#8 of 22 need help.Please by dawes Dec 04, 2006 (6:20 pm)
I have a 99 Ranger 4x4 2dr. super cab and I am haveing alot of difficulty findingexterior parts for this truck(without burning my wallet)I am looking for a brush guard,nerf bars and a suspension lift.I would also like to have a topper on this truck,but I have not been able to locate one for a step side.If any of you could help me at all I would appreciste it.Thank you. Replies to this message: icescort (Dec 15, 2006 3:20 pm)
#9 of 22 Re: need help.Please [dawes] by icescort Dec 15, 2006 (3:20 pm)
Replying to: dawes (Dec 04, 2006 6:20 pm) You dont need "help". You need "Money". Ebay will have the lift kits and all the bolt on steel stuff. A topper can be found used at many dealerships(they often remove them from trade ins).It will take some seaching but a used "splash" fiberglass cap could be found for around two hundred to three fifty or so for a nice one, beat up or weathered might be had for less.
#10 of 22 06 Ranger whats up with the wind noise? by redranger06 Feb 03, 2007 (11:05 pm)
I hear tons of wind noise when driving on the highway in my 06 Ranger. My 86 and 97 Rangers never did this. Did Ford make a bad design change?? How can I fix this? Will the dealer help me? Replies to this message: msgtord (Nov 04, 2007 6:54 am)
#11 of 22 2006 Front Molded Mudd Flapps by redranger06 Feb 13, 2007 (8:46 pm)
Where can I find them?? Front molded mudd flapps for an 06 Ranger Super cab, 4x4, 4.0, w/o flare. Please help, I've benn looking eeverywhere. All I get is flat universal type of flaps when looking. Thanks, Redranger Replies to this message: bwagner (Feb 16, 2007 10:41 am)

Messages Page 2 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Ford Ranger Ford Ranger Body Accessories