Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra 4x4 Questions
236 messages, Last post on Nov 17, 2009 at 5:35 AM
You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram
|
Replying to: osweeks (Jan 08, 2008 5:43 pm) Thanks, osweeks
|
|
Greetings Everyone! I am new to the group and looking for a little info regarding a recent problem with my truck. I have a 99 GMC Sierra 1500 Z71 with 195K. Recently while troubleshooting a drivetrain vibration I have found that the front driveshaft is not disengaging. The electronic 4WD works correctly and the front wheels disengage when switching to 2WD but the front driveshaft stays engaged and turning. Any suggestions of where or what to possibly look at as the culprit?
|
|
|
|
| I have been having a problem with my 2001 GMC Sierra C3 for about 6 months now and am hoping someone can point me in the right direction to get it fixed. At low speed while making sharp turns I have vigorous shaking in what seems like the front. This truck is AWD all the time instead of push button 4WD. I initially thought it was a problem with my AWD, but a guy told me yesterday that it may have something to do with my transfercase. He suggested I drain it and put more fluid in. If the problem is not resolved after that I am to go take it in and have it reprogramed. Finally if this does not work I am to have some serious maintainence done. I am interested to see if any of you truck owners can point me in the right direction. I have had numerous work done over the last including a left ball joint and bearing and a UV joint replacement. I am hoping for a simple fix, but nothing seems to be simple or inexpensive with this truck. Please Help | |
|
Recently took my 04 Silverado ext cab 1500 to the snow and heard this growling noise in the front end when turning. Also smelled a burnt rubber smell after I stopped. After going back to 2 Hi no problems. It is a manual 4WD transfer case switch. Any thoughts
|
|
|
Replying to: mlarsen (Jan 22, 2008 12:20 pm)
|
|
|
|
| I have a 2000 gmc 1500 4x4. I took it to the snow this last weekend. I noticed when i got back it was making a noise. The only time it does it is when im backing up. I thought it might still be in 4 wheel drive but the front tires dont pull. I took out the front drive line but still makes the noise. It also feels like it dosnt have as much hores power. I dont have a hole lot of money to fix it. Is there some one who can help. | |
|
|
I have a 2000 gmc 1500 4x4. I took it to the snow this last weekend. I noticed when i got back it was making a noise. The only time it does it is when im backing up. I thought it might still be in 4 wheel drive but the front tires dont pull. I took out the front drive line but still makes the noise. It also feels like it dosnt have as much horse power. I dont have a hole lot of money to fix it. Is there some one who can help.
|
|
|
|
|
Replying to: gizzel0382 (Jan 25, 2008 7:36 am)
|
|
|
|
|
Replying to: vinceblas (Jan 04, 2008 9:11 am) |
|
|
|
|
Replying to: bruce48532 (Jan 25, 2008 8:02 am) |
|
You are here:
Forums
Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra 4x4 Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Silverado 1500
2004 Chevrolet Silverado 2500
2006 Chevrolet Silverado 3500
2010 GMC Sierra 1500
2004 GMC Sierra 2500
2006 GMC Sierra 3500
Browse by Board
Browse by Topic
Today's Chats
