You are here: Forums Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra 4x4 Questions

Chevy Silverado and GMC Sierra 4x4 Questions

233 messages,  Last post on Nov 08, 2009 at 11:21 PM

You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram

What is this discussion about? Chevrolet Silverado 1500, Chevrolet Silverado 2500, Chevrolet Silverado 3500, GMC Sierra 1500, GMC Sierra 2500, GMC Sierra 3500, Truck

#184 of 233 Re: 2000 Silverado 1500 4x4 what's wrong? [krazyk22] by obyone Jun 23, 2009 (11:36 pm)
Replying to: krazyk22 (Jun 23, 2009 2:28 pm) You're correct. It's the transmission.
#185 of 233 2008 chevy silverado z71 by krazy08 Jun 26, 2009 (2:06 pm)
since it has no torsion bars, is there any way to level front end without lift? Replies to this message: havatoker (Jul 26, 2009 5:22 pm)
#186 of 233 Re: 4x4 basics [ognend] by lsabourin Jun 27, 2009 (12:11 pm)
Replying to: ognend (Mar 31, 2009 3:02 pm) Hey there Ognen, First of all, to shift into/out of 4Lo you have to be stopped and put the transmission in neutral. And I would recommend to back up several feet after you shift out of 4Lo if you are able to to ensure that the front end is completely disengaged. When ever you are in 4X4 mode and you are have the wheel cranked all the way right or left, your front end will feel like it is binding or "skipping" if you prefer, which is perfectly normal. It will not feel like a 2wd because it a 2wd has no drive line up front.
#187 of 233 trouble with front seal and noise by longtimegmfan Jul 25, 2009 (12:01 pm)
I recently replaced a front seal on my 2002 Silverado. When I went to a parts dealer to buy it, he said he had 60 in stock due to the number he had to sell for replacement. Now it makes some nice extra noise. Anyone else having the same problem?
#188 of 233 Re: 2008 chevy silverado z71 [krazy08] by havatoker Jul 26, 2009 (5:22 pm)
Replying to: krazy08 (Jun 26, 2009 2:06 pm) Order you some heavy duty springs, that will raise it up.
#189 of 233 2000Silverado , will not shift into 4X4, everything but wiring has been cha by havatoker Jul 26, 2009 (5:24 pm)
#190 of 233 2000 Chevy , lights will blink , but no 4 wheel drive by havatoker Jul 27, 2009 (4:45 pm)
Have replaced everything ,even wiring ,added more grounds, replaced front actuater, replaced encoder and acuater,moduale ,push buttons ,everthing but computer.
#191 of 233 2000 Chevy , lights will blink , but no 4 wheel drive by havatoker Jul 27, 2009 (4:46 pm)
Have replaced everything ,even wiring ,added more grounds, replaced front actuator, replaced encoder and actuator,moduale ,push buttons ,everthing but computer.
#192 of 233 2000 4X4, still no responce by havatoker Jul 28, 2009 (3:24 pm)
I guess there is no one that can help , out of all the ones that have posted their problems, looks as though some one could elaberate on my question !!!!!!!!! Replies to this message: obyone (Jul 28, 2009 3:30 pm)
#193 of 233 Re: 2000 4X4, still no responce [havatoker] by obyone Jul 28, 2009 (3:30 pm)
Replying to: havatoker (Jul 28, 2009 3:24 pm) Who did the work you listed so far?   Why add additional ground? And where were they added?   There were different solutions as to why 4WD couldn't be engaged but no one ever did what you described so no solution could be offered. However, I have the factory manual for your year and could look through the trouble shooting section on 4WD.

You are here: Forums Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra 4x4 Questions