Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra 4x4 Questions
233 messages, Last post on Nov 08, 2009 at 11:21 PM
You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram
|
|
|---|---|
|
Replying to: btm1967 (Dec 29, 2008 6:10 pm) |
|
|
|
| hi I have a 2009 sierra reg cab 4x4 long box with the 4.8 and manual shift transfer case. i have owned the truck for about 2 months. When it starts to be pretty cold outside i get a clunking noise (sounds like somthing is rocking) when u turn or the truck starts to rock( coming in a drive way or incline on an angle). This noise seems like it is coming from under my feet, but then again the truck is steel so the noise could be transfered from anywhere. The noise happens not all the time and it does not always have to be COLD outside for it to do it. i have checked the spare tire,exhaust, front suspension,rear supension, looked for loose bolts. and have come up empty handed does anyone have any ideas? Thanks for the help ( and oh ya the dealer say's they have never had any complaints like this one before....... ya right) | |
|
|
|
Replying to: dans04z71 (Dec 15, 2008 5:53 pm)
|
|
|
|
| an update i took the truck back to the dealer, and was told that the noise im feeling and hearing is coming from the reear axle, they told me it was axle play and nothing i should concern myself with...., guess im feeling it being transfered through out the truck........ im not sure if i should belive them because i had an 03 s-10 comp edition, and that truck never made this noise, and come to think of it i dont think ive ever hear that noise or felt it in any of the other truck i have ever ridden in......... on a side note i found my old truck at a dealer and when i started to ask questions about it the guy told me it had 116000 km on it,, and when i told him i was the original owner of the truck he walked away from me...... now i sold that truck 3 years ago to the dealer with over 100000 on it, sounds like to me that someone had turned the odemiter back!... and it was most likley the dealer considering he walked away from me when he found out it was mine.......... hum.......... | |
|
|
|
Replying to: jackoue (Jan 22, 2008 7:02 pm) |
|
|
Replying to: bthornhill (Jan 16, 2009 8:29 am) |
|
|
|
| Hi I have a '99 sierra 1500 that first would stick in 4 hi. Dash push button shift lites would work intermetily. Changed the fornt axle accutator and she worked up and down our drive, test drive, for 4 trips then the next morning I started it and no lites and stuck in 4 hi again. The indicator buttons would lite when I turned the ingintation on. Took to a friend and he got a code co 327 but it would not give him what was bad. He used his DT'er to tri it into 2 wh. The lites went back off and he could not over ride that module up under dash. He believes that is bad, But like me not certain. Any idea's? Thanks | |
|
Replying to: gwhitney (Oct 14, 2008 4:00 pm) |
|
|
|
|
Shift motor won't shift from hi to lo or back/ neutral to either,also blows fuse,but I can put a jumper in the fuse slot and it works.any thoughts? Can there be a short somewhere? |
|
|
Replying to: cooperbiker (Feb 18, 2007 7:14 am)
|
|
You are here:
Forums
Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra 4x4 Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Silverado 1500
2004 Chevrolet Silverado 2500
2006 Chevrolet Silverado 3500
2010 GMC Sierra 1500
2004 GMC Sierra 2500
2006 GMC Sierra 3500
Browse by Board
Browse by Topic
Today's Chats
