You are here: Forums Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra 4x4 Questions

Chevy Silverado and GMC Sierra 4x4 Questions

233 messages,  Last post on Nov 08, 2009 at 11:21 PM

You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram

What is this discussion about? Chevrolet Silverado 1500, Chevrolet Silverado 2500, Chevrolet Silverado 3500, GMC Sierra 1500, GMC Sierra 2500, GMC Sierra 3500, Truck

#108 of 233 Best Tires on a Silverado? by blckislandguy Sep 30, 2008 (5:37 pm)
I have an '08 Silverado 1500 (non-Z28) that came with some fairly unagressive all season tires. Does anyone have any suggestions for the best replacement tire that would deal well with snow, ice, and highway driving? Replies to this message: obyone (Sep 30, 2008 9:57 pm)
#109 of 233 Re: Best Tires on a Silverado? [blckislandguy] by obyone Sep 30, 2008 (9:57 pm)
Replying to: blckislandguy (Sep 30, 2008 5:37 pm) I'm assuming you mean non-Z71.   I've always installed Michelin LTX M/S on my trucks after the stocks wore out and sometimes much earlier.   However, while visiting tirerack looking for tires other than the Michelins I stumbled upon these and picked up a set after reading their survey results which were stellar.   Firestone Destination A/T   After 5K miles, they are everything that their survey results say they are.
#110 of 233 88 silverado 4x4 1500 350 by jvertree Oct 11, 2008 (6:12 pm)
my transfer case started makinf a thumping noise sounded like a u joint ggoing out i just replacrd the rear u joint and thought another was going out i dont know what is inside the transfer on this one i am only familar with the 208s i n a 84 chev can you tell me what it might be it still works great in 2 and 4 low and high thanks
#111 of 233 2000 silverado front drive shaft concerns by gwhitney Oct 14, 2008 (4:00 pm)
I have the electric shift and I hear it change to all positions, It also appears to be working, however when I have it in 2 WD is the front drive shaft supposed to be turning all the time or is it supposed to be disengaged. I had my wife move it in the drive way and it turned both in forward and reverse. I also tried to turn it by hand just to see if it might be free wheeling. It is not. It is either engaged at the transfer case or at the front axle. Is this normal? It all stared to concern me when the service 4wd light came on. It has happened twice now and goes off when I restart the truck. Both times I was driving in 2WD. there were no codes / messages logged in the computer when it was checked. Replies to this message: Duane99 (Dec 27, 2008 3:36 pm) cpittman (Feb 03, 2009 4:07 pm)
#112 of 233 1976 gmc 4x4 problems by 1976chev4x4 Oct 15, 2008 (4:33 pm)
I have a 1976 GMC long bed 4x4 and it has new warn lockers the 4x4 was working great then one day i was going to go riding and i locked the hubs and shifted in low range and just the backs spun any ideas
#113 of 233 2001 4x4 problems with switch by petre15 Oct 18, 2008 (3:25 pm)
my control for the 4x4 stopped working.went out and bought a new controll and still the light will not come on.if anybody knows if there is a another problem just let me know
#114 of 233 dic controls by basgmc08 Oct 21, 2008 (2:54 pm)
I want to put dci controls on my 2008 gmc and was wondering if i could just buy the parts, without having to programing the computer? Replies to this message: obyone (Oct 21, 2008 3:46 pm)
#115 of 233 Re: dic controls [basgmc08] by obyone Oct 21, 2008 (3:46 pm)
Replying to: basgmc08 (Oct 21, 2008 2:54 pm) Are you asking about this?   DIC   If so, yes you can order the part, install it and it will work with no programming needed. However, sorry to say it is on national back order. Guess it's a popular thing to do.   There may be another source that has it. Try checking here:   DIC switch
#116 of 233 re dic by basgmc08 Oct 21, 2008 (6:35 pm)
Thank you! The dealership didn't know if it would even work! What about dual climate will it be the same way plug n play so to speak? Replies to this message: obyone (Oct 21, 2008 9:24 pm)
#117 of 233 Re: re dic [basgmc08] by obyone Oct 21, 2008 (9:24 pm)
Replying to: basgmc08 (Oct 21, 2008 6:35 pm) I'm not absolutely positive on this but as I remember the pin out on the backside of the dual is different. Not doing so would make it way too easy for people to upgrade.

You are here: Forums Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra 4x4 Questions