5 messages,
Last post on Mar 08, 2008 at 12:50 PM
You are in the
GMC Envoy Forum.
What is this discussion about?
GMC Envoy XL, SUV
#1 of 5 GMC Envoy Brake controller
by rzordan
Mar 17, 2006 (3:18 pm)
I am new to this group as well as to my new 05 Envoy. I just purchased a brake controller that came with a specific wire harness for a GMC. At first glance I can't see where to plug it in andon't want to start ripping the dash apart. Does anyone have any info on where the plug may be? Thanks for the help.
Rob Z
#3 of 5 Breaks sqeak already?
by glags11
May 27, 2006 (3:12 pm)
Just leased a brand new 06 envoy..after driving for 2 days i've noticed the brakes squeaking very loudly right before the truck stops and then again right after I press the gas. This happens for about 5 or so seconds each time i break and press the gas, then it stops. Sometimes this squeaking continues when i am driving as well. Any one have any ideas as to why this is happening? Thank you.
#5 of 5 Just purchased a 2008 Envoy SLE, trying to locate
by hockster31
Mar 08, 2008 (12:50 pm)
where the brake controller wiring is under the driver's side console. I also just purchased a Jayco Jayfeather Sport and need to get the controller installed. Was hoping to do this myself. There is nothing in the manual that states how or where it's located. Any help would be appreciated. My controller has 4 wires coming out of the box. Black, Blue, Red and White. Tekonsha Envoy 9040 controller. Thanks in advance