Sign In Join 



Chevy Silverado and GMC Sierra Noise and Vibration

172 messages,  Last post on Oct 28, 2009 at 1:49 PM

You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram

What is this discussion about? Chevrolet Silverado 1500, Chevrolet Silverado 2500, Chevrolet Silverado 3500, GMC Sierra 1500, GMC Sierra 2500, GMC Sierra 3500, Truck


Messages Page 18 of 18
1
...
12
13
14
15
16
17
18
Prev
Next
Last
Go To Msg #
Search This Discussion

#170 of 172
02 silverado 2500hd 6.0L Noise by lost1z
Sep 29, 2009 (8:56 am)
Reply
I am confused, with max AC selected on, I hear what sounds like the engine fan rubbing during heavy acceleration and just coming off the acceleration. Fan tips seem to be worn, but good clearance around fan shroud with engine turned off. I do not witness any severe engine movement during acceleration or deceleration. Noise will occur in "park" or when driving. Water pump changed last year, everything appears normal. Belt tension & wear normal. AC blows cold. I was thinking of the following possible causes: broken motor mount (don't see motor sway), fan clutch, ac compressor, or harmonic balancer. It is difficult to confirm with engine rpm around 2500-2900 rpm on quick accel or decel.
  
Has anyone seen this before or have any input?
#171 of 172
Re: 02 Sierra Rear End Noise [clareance] by redbuggyboy
Oct 08, 2009 (12:54 pm)
Reply

Replying to: clareance (Aug 31, 2009 5:45 pm)

Lube your Leafs! Spread each leaf and spray heavy lube on the little pads between each leaf. I also took out leaf spring mount bolts as far as possible and lubed inside their bushing too. There is a TSB out there about replacing the leaf pads with teflon material pads.Hope this helps!
#172 of 172
accelerator vibration by bizzo
Oct 28, 2009 (1:49 pm)
Reply
Have a 09 GMC Sierra. Several months ago started feeling two distinct vibrations coming from the gas pedal shortly after putting it in drive and starting to pull away. After this you won’t feel the vibrations again until the truck has been put into park again and shut off for a few minutes. The speed that I pull away at doesn’t seem to be a factor and it won’t do it in reverse. Been to the shop numerous times and each time they call it “normal operation” except that it didn’t do it when I bought it 6 months ago. Any ideas?

Messages Page 18 of 18
1
...
12
13
14
15
16
17
18
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement