Sign In Join 



Chevy Silverado and GMC Sierra Noise and Vibration

172 messages,  Last post on Oct 28, 2009 at 1:49 PM

You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram

What is this discussion about? Chevrolet Silverado 1500, Chevrolet Silverado 2500, Chevrolet Silverado 3500, GMC Sierra 1500, GMC Sierra 2500, GMC Sierra 3500, Truck


Messages Page 16 of 18
1
...
12
13
14
15
16
17
18
Prev
Next
Last
Go To Msg #
Search This Discussion

#151 of 172
04 silverado by redneck4
Jan 25, 2009 (7:43 pm)
Reply
I have a 04 silverado, when you hit a bump in the road at night the dash lights will get very bright then they will go back to dim were i have them set can anyone help me with this. I also have a rattling noise at low rpms around 30mph and can't figure out what it is. I read were some said they relocated the dipstick I am going to look in to that .
#152 of 172
Re: 2003 silverado noise [hbridges] by howie10
Feb 17, 2009 (7:18 am)
Reply

Replying to: hbridges (Jul 17, 2007 1:06 pm)

Did you ever find out what the noise was i have the same thing on my 2003 4x4 howie10
#153 of 172
08 GMC Sierra Rear End Noise by titlumtatlum
Mar 20, 2009 (10:49 am)
Reply
I recently bought an 08 GMC Sierra. I have noticed that it has a vibration and roaring noise coming from the rear of the vehicle when I put it into gear before moving and also when I am accelerating or decelerating at varying speeds. I have read several other posts regarding similar issues, but am unsure as to what to try to explain to the dealer's repair shop when I take it in for this problem. Could someone please give me some real insight into this problem?
#154 of 172
Silverado vibrating at 50m/h by wade13
Apr 03, 2009 (3:12 pm)
Reply
#155 of 172
Silverado vibrating at 50m/h by wade13
Apr 03, 2009 (3:12 pm)
Reply
I seem to have a shimmy/vibration when reaching 50miles per hour. Just had the u-joint at the driveshaft replaced. Any suggestions on what this might be?
Thanks in advance.
#156 of 172
08 GMC Sierra Rear End Noise by titlumtatlum
Apr 14, 2009 (8:02 am)
Reply
When you accelerate or decelerate and the truck reaches about 1300-1500 RPM the rear end makes a grinding/vibrating sound (low pitched). It also seems to make when driving steady speeds on the highway. I took the truck in to the dealer's shop and they told me that it was the heat shield on the muffler. The fix was to install a strap over the heat shield to hold it down. They installed it. I drove out of the parking lot with the truck making the same noise, maybe even worse than before. I called them back to let them know that it was doing the same thing. The reply....just bring it in again. I am getting pretty tired of this on a $20,000 truck.
Has anyone else had this type of problem?
#157 of 172
Squeal/chirping noise by Bloozester
Apr 15, 2009 (4:12 pm)
Reply
A while back I posted that I was getting a squealing/chirping noise on my '02 1500 4x4. I figured it was the brake pad squealer as I just bought the truck in December. Took all the wheels off today finally, and all the pads are worn evenly and still have about 3/8" left. So the pads aren't worn down. The chirping is speed dependent and never turns into a continous squeal up to about 45 mph, which is where I can't hear it anymore. If I'm going 25-30mph and it's chirping, if I put on the brakes lightly it seems to go away (although it's replaced by brake squeal). I tried shooting brake cleaner on all the pads/rotors today and this made no difference but to quiet the brake squeal down some. My Dad rodei n the back and hung over the rear wheels and said it sounded the same from both sides. The front wheels seemed tight, there was a little play in the rear wheels, but you had to really hoss on the wheel to feel it. Any suggestions onwhere to look next?
#158 of 172
Re: Squeal/chirping noise [Bloozester] by Bloozester
Apr 20, 2009 (7:35 am)
Reply

Replying to: Bloozester (Apr 15, 2009 4:12 pm)

Had to take the truck out of state for several days and on the drive back the squeaking got worse. Took it to a shop this morning and they said the rear axle is slightly bent causing the hub to wobble and the brake pads to hit and squeak. Great.....$540 + tax.
#159 of 172
Front end vibration by 1truck
May 16, 2009 (8:55 am)
Reply
I have a 2000 GMC Sierra Z71, Ext cab, 4wd, 5.3, 174k with front end vibration from 45-65 mph. It feels like a broken belt in the tire. Tires have been rotated to all 4 corners with no change. There is some side to side play in the left front but none up and down. The lower ball joint has a little movement as well. The right side is tight, no problems. Could it be a wheel bearing? Any thoughts are greatly appreciated.
#160 of 172
Re: Front end vibration [1truck] by obyone
May 16, 2009 (11:08 am)
Reply

Replying to: 1truck (May 16, 2009 8:55 am)

When rotating the tires, were they balanced?

Messages Page 16 of 18
1
...
12
13
14
15
16
17
18
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement