You are here:
Forums
Pickups
Chevrolet Silverado & GMC Sierra
Chevy Silverado and GMC Sierra Noise and Vibration

172 messages, Last post on Oct 28, 2009 at 1:49 PM
You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram
|
Replying to: chadmcabee (Jan 09, 2008 11:24 am) Getting Chevrolet to honor the new vehicle warranty that I paid for in the price of the truck is like pulling teeth. |
|
|
Hey all I have a problem that I cannot get fixed. I have had the vehicle to the dealer 3 times and they cannot find the problem. Here are the symptoms. When I apply the brakes, the truck starts bouncing in the front end. I have replaced the rotors and brake pads and the ball joints are supposedly good. Had them checked out the last time in, and I was told they are ok. I have bought new upper and lower to replace the old ones, but was told it would be a waste of money. So I guess my question is, should I go ahead and have them replaced anyways, and also have the steering link replaced along with the front end bushings?? Anyone ever come across this problem??? The truck has 190K miles on it and the ball joints are the originals, but I do grease them, along with the rest of the lube points, with every oil change.
|
|
|
Replying to: kyhiker65 (Mar 18, 2008 2:40 pm)
|
|
|
Replying to: obyone (Mar 18, 2008 11:58 pm)
|
|
| HI--I purchased a lightly used 2004 Sierra off of a GMC dealer about 6 weeks ago. It has the big block 496 and the Allison 5 speed and is very fun to drive and I assume that come camping season it will pull my camper effortlessly. In the last couple of days though I have noticed that if I lightly apply the throttle from a dead stop I get this minor thump or thunk. I have asked people riding if they have felt or heard it and nobody notices it. It is there and I certainly notice it---so my question is whether anybody else has this combo and notices it or whether it is "normal" with these Allisons. It almost feels like what a bad u joint would do...... I have also read alot about the torque converter bolts loosening on these trucks. Hellllllllllllllllllllppppppp I love the truck but don't want any trouble on a 4 year old rig with 40,000 miles. | |
|
Replying to: nsauceman (Jan 08, 2008 8:19 pm)
|
|
| i have a 94 serria 4x4 with overdrive auto trans,at approx 105 kph and 2000 rpm the front end shakes so violently i think its going to come apart,if i let off or step on the gas it quits as long as i stay out of the "sour spot",just put new tires on it and the shop didnt say anything about bent rims,im lost | |
|
Replying to: sjsracin (Feb 18, 2008 7:19 am) |
|
|
Replying to: jhawkes2 (Mar 08, 2008 3:33 pm) |
|
|
|
|
Replying to: kyhiker65 (Mar 19, 2008 1:37 pm) |
|
You are here:
Forums
Pickups
Chevrolet Silverado & GMC Sierra
Chevy Silverado and GMC Sierra Noise and Vibration
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Silverado 1500
2004 Chevrolet Silverado 2500
2006 Chevrolet Silverado 3500
2010 GMC Sierra 1500
2004 GMC Sierra 2500
2006 GMC Sierra 3500



Browse by Board
Browse by Topic
Today's Chats