You are here:
Forums
Pickups
Chevrolet Silverado & GMC Sierra
Chevy Silverado and GMC Sierra Noise and Vibration

172 messages, Last post on Oct 28, 2009 at 1:49 PM
You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram
|
Replying to: gumpp08 (Apr 17, 2006 5:08 pm) |
|
|
Replying to: xbbuster (Jan 09, 2008 5:51 am) |
|
|
|
|
i recently purchsed a brand new body style silverado 4/28/07. i then waited about 2 months and noticed that when ever I hit a bump going like 5-15 miles per hour there is a VERY noticeable clunking noise coming from the rear end... didnt think much of it till it started getting worse... i now have a 6" lift and 35s on the truck, the clunking is the same it was after 3 months... im gonna be taking my truck into the dealer on monday for my hindges that are rough when closing the driver door, and the same as some other people the side steps. i ordered OEM running boards and put them on and now theres a creaking noise coming from the door... only when the doors are closed though... im not happy with the vehicle that i decided to purchase... im a big chevrolet fan but the last thing i need is for GM to tell me to wait and then have my whole rear end fall out going down route 28, or to have my driver door to fall of, or even have my running boards snap on me... as far as the rear end goes i thought it was a chevrolet thing.. then i see al these other posts about it and how they had to pay $400 to get it fixed... my truck only has 6,500 miles on her. i dont feel i should have to pay anything... |
|
| Hey, After looking at westins website, I found that there is a one eight inch minimum clearance on the front body pocket mounts for the steps bracket, sure enough the installer did not follow this in the instructions for installing the tubes, I crawled under the truck the other day and loosend the steps and adjusted to specs, Then torqued to 74 foot pounds, and Voila no more creeks or noise.........Why did i pay someone to install these..........Damn | |
I have a 05 silverado 4X4 5.3 it has a vibration at 45mph-55mph after it shifts in over drive,if i give gas it stops vibrating if i let off the gas it stops vibrating. This happens around 1400 rpms
|
|
| I have an '07 Classic Ext. Cab 2WD 6cyl with 6500 miles. I am taking it in for warranty work today. I have a vibration in the gas pedal that begins at 35mph. There is also a slight vibraton in the steering wheel at the same time. Just wanted to know if anyone else has had a similar problem. | |
|
Replying to: sjsracin (Feb 18, 2008 7:19 am)
|
|
new to the board. o4 silverado 4.8 extended cab. getting a vibration at 45 mph. dealer has checked and rechecked everything from tire balance to replacing the driveshaft. final determination was there isn't a cure except to run with 200-300 lbs of weight in the bed. any thoughts or suggestions?
|
|
|
Replying to: alc8 (Mar 10, 2008 4:18 pm) Use this link to find a hunter near you. Hunter balancer |
|
|
Replying to: alc8 (Mar 10, 2008 4:18 pm) |
|
You are here:
Forums
Pickups
Chevrolet Silverado & GMC Sierra
Chevy Silverado and GMC Sierra Noise and Vibration
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Silverado 1500
2004 Chevrolet Silverado 2500
2006 Chevrolet Silverado 3500
2010 GMC Sierra 1500
2004 GMC Sierra 2500
2006 GMC Sierra 3500



Browse by Board
Browse by Topic
Today's Chats