Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra Transmission Problems
506 messages, Last post on Dec 01, 2009 at 1:57 PM
You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram
|
Replying to: annabelle1140 (Mar 28, 2009 12:29 pm) Good luck |
|
|
|
hi,i need some help please.I just rebuilt a 4l60e with a rebuild video.I used a master overhaul kit.put new vette servo and new 2-3 shift solenoids.i didnt replace the wiring harness.i had rebuilt it cause i lost 3-4 gear.i put the transmission in and it doesnt have reverse,jumps when you put it in park.and drives forward in neutral.but as far as 1-2-3-od they work great shifts are better then ever.if anyone can help please do. thank you
|
|
| i have an 03 1500hd, and the transmission started overheating for no reason. I replaced the transmission and flushed out everything and it is still overheating. if you have any information about this problem please help me out. thanks, nick | |
|
Replying to: ineedhelp690 (Apr 05, 2009 6:09 am)
|
|
| I have an 07 Chevy 1500 Silverado 4x2. 10 -15 seconds after being at a complete dead stop not moving at all or anything, my truck will clunk and surge forward almost like i was rear ended. The dealer keeps lubing my driveshaft and yolk but that is not it. It almost feels like the truck stops in 2nd gear and 15 seconds later goes "O crap i'm in 2nd and shift down to 1st." i don't know if it is a computer thing or tranny thing or what. Has anyone had this problem as well and got it fixed. I have the settle back clunk from the extended leaf springs that the lube fixes but this is way different. Please post back if you know the fix or anything that could help. | |
|
|
|
Replying to: helpnick (Apr 05, 2009 11:33 am)
|
|
|
|
|
Replying to: ineedhelp690 (Apr 06, 2009 7:43 am) |
|
|
I have a 1994 chevy dually 3500 1-ton and am having trouble with the tranny. After driving on the freeways for a period of time then getting off an off-ramp, the truck ssems like it is in neutral - when I shift to a lower gear nothing happens and when I try to put it in park or reverse it won't go in (makes a grinding noise). It drives fine and their is no slippage when I just drive around town, stoplight to stoplight, and drives fine when on the freeway, but when I get off the freewayit;s like it gets stuck in the gear it's in and wont downshift when I slow down. Eventually it will go back into gear, but not because of something I do - just does it by itself? any ideas? Thanks,
|
|
| I was test driving a Z-71 4X4 and I noticed a Service 4WD message in the cluster. I tried to press the 4WD buttons but nothing seemed to happen. Also noticed a red led that indicated "N" that is located between 2 of the 4WD buttons. The truck has193K miles on it. If the transfer case or transmission needs servicing, will it deactivate the 4WD function?????? | |
|
Replying to: dotr04 (Apr 08, 2009 9:43 am) Plastic pistons in the valving process start to crack (older Sable/Taurasourus do) and get stuck in position from freeway speed heat? Maybe gunk collection? Find a trans shop or mechanic you trust. I would expect a shop to be required to do a whole trans redo. Liability issues would prevent a less expensive valve body "patch". |
|
You are here:
Forums
Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra Transmission Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Silverado 1500
2004 Chevrolet Silverado 2500
2006 Chevrolet Silverado 3500
2010 GMC Sierra 1500
2004 GMC Sierra 2500
2006 GMC Sierra 3500
Browse by Board
Browse by Topic
Today's Chats
