Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra Transmission Problems
506 messages, Last post on Dec 01, 2009 at 1:57 PM
You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram
|
Replying to: gnusarev (Aug 12, 2008 12:23 pm) Again, about a year later, same thing. Wix filter was installed again, and again same problem. However, when I replaced the Wix with a GM/Delco filter, the problem didn't get solved. Does anyone out the have any other suggestions? |
|
|
|
| I recently noticed my transmission shifting hard at times. It normally shifts really smooth,but occasioinally hard. I noticed it more often now that the weather is warmer. the tempeature guage for the transmission runs around 150 degrees. I don't know if the fluid and filter has ever been changed. I bought the truck used and was wondering if it was okay to change them with the mileage at159000. | |
|
|
|
Replying to: obyone (Dec 20, 2008 10:15 pm)
|
|
|
|
|
Replying to: 2001silverado (Mar 15, 2009 7:44 am) |
|
| I have a 2002 Silverado 2500-HD 6.0 liter gas with 104,000 miles on it. The transmission shifts very smooth while accelerating, but during deceleration or braking, the vehicle starts shuttering and acts as if doesn’t want to down shift. Has anyone experienced this problem or have any ideas. Thanks. | |
| i have an 04 chevy 2500hd 6.6 that surges at idle. if i let the truck idle it jumps from 1000 to about 1500 every 4 to 5 secs. it only happens sometimes so it's kind of hard for me to pin point the cause of it. plus my engine light likes to come on an won't let me go over 2500 rpms. the code says something like (pressure regulator failure at acceleration). i know someone has to have same problem out there. if anyone can help with this please help. | |
|
|
Had a new motor and tranny replaced 14 months ago. When I take off to drive the truck, I have to push firmly on the accelerator to get it going. Once the RPMs get high enough it shifts into 3rd gear and does fine from there. It seems to be skipping 1st and 2nd gear. Transmission shop did diagnostics, said it threw a code 66. He then bypassed the computer and said the transmisssion works fine. He sent us to electric shop, for electrical problem. They checked the wiring from the ECM to the transmission and said its fine, so it must be the main computer. We have replaced the main computer and still Not working correctly. Any clues, these diagnostic fees have emptied our pocket. Please help">
|
|
|
Replying to: annabelle1140 (Mar 28, 2009 12:29 pm) Good luck |
|
|
|
hi,i need some help please.I just rebuilt a 4l60e with a rebuild video.I used a master overhaul kit.put new vette servo and new 2-3 shift solenoids.i didnt replace the wiring harness.i had rebuilt it cause i lost 3-4 gear.i put the transmission in and it doesnt have reverse,jumps when you put it in park.and drives forward in neutral.but as far as 1-2-3-od they work great shifts are better then ever.if anyone can help please do. thank you
|
|
You are here:
Forums
Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra Transmission Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Silverado 1500
2004 Chevrolet Silverado 2500
2006 Chevrolet Silverado 3500
2010 GMC Sierra 1500
2004 GMC Sierra 2500
2006 GMC Sierra 3500
Browse by Board
Browse by Topic
Today's Chats
