Last post on Feb 22, 2009 at 11:22 AM
You are in the Scion tC
What is this discussion about?
Scion tC, Scion xB, Scion xA, Convertible, Hatchback
#268 of 317 Re: Clark [jmachado]
Aug 11, 2007 (6:44 am)
i put 17's on and dont have a problem and 18's will mess up ur speedo
Aug 11, 2007 (6:53 am)
i have an 06 scion xb and i love it.
i just put a cold air intake and an exhaust on it and freed up a lot of power. also my 17 inch wheels are amazing. i looking for a turbo and headers right now. then im puting a new system in.
#270 of 317 Re: scion xb [mercinary]
by MrShift@Edmunds HOST
Aug 11, 2007 (10:06 am)
Don't put on a turbo until your warranty expires, or you'll lose it.
#271 of 317 10.2" Ceiling Mount DVD in 08 xB
Aug 19, 2007 (2:14 pm)
Has anyone installed a 10.2" ceiling-mount DVD player in a 08 xB?
Can you still see the back on the rearview mirror?
I am looking at Audiovox Shuttle system from Bestbuy and Circuitcity, but I don't know if it will block the rearview.
Oct 07, 2007 (8:55 am)
Just the floor mats, and XM.
#273 of 317 Re: Scion Owners: Accessories & Modifications [KarenS]
Oct 27, 2007 (2:37 pm)
Can anyone tell me where to get suicide door kits for a 2007 scion tc ? my e-mail is hedzupftc-i.net Thanks!
#274 of 317 Mud flaps for xD
Nov 14, 2007 (7:37 pm)
Just bought my xD 4 days ago and looking to find mud flaps...local auto parts and on line...no luck...anybody know where I can find some?
#275 of 317 Re: Mud flaps for xD [zbrook1]
Nov 15, 2007 (6:20 am)
I don't think they make any for the xD (yet).
#276 of 317 2008 scion xb....need speaker size
Nov 15, 2007 (2:41 pm)
I need to know the size of the stock door speakers in the xb, I want to upgrade them.
#277 of 317 Re: 2008 scion xb....need speaker size [tonguetwiztid]
Nov 16, 2007 (11:49 am)
Simple, just go to Crutchfield and put in a 2008 xB and it will tell you what fits where. Looks to be 6 1/2" in the front doors, same as the gen 1 xBs.
I think you also have to be careful (like the 1st gen) if you just replace the front door speakers since the dash mount "tweeters" are wired in parallel with the front door mid-range speakers. You will either want to disconnect the factory "tweeters" or replace both the sets with a component set of speakers. If you just replace the door speakers the sound is not likely to improve and the resulting impedance load for the stereo may be bad for it.
In the 1st gen xBs the door speakers are riveted in place, if the 2nd gen is the same you will have to drill out the rivets (be sure to wear safety glasses) and get an adapter pair or make some from MDF. If you order from Crutchfield they will include the adapters and speaker wire harnesses (no cutting) for free with the speaker purchase. I am partial to Polk components, and you can find them a lot cheaper (normally) on fleabay than Crutchfield and buy the adapters and still come out ahead. Can't return them for a full refund if you don't like then like you can at Crutchfield, however.