You are here: Forums Pickups Nissan Frontier Nissan Pickups Maintenance and Repair

Nissan Pickups Maintenance and Repair

460 messages,  Last post on Oct 15, 2009 at 5:22 PM

You are in the Nissan Frontier Forum. Your Host is kcram

What is this discussion about? Nissan Frontier, Nissan Titan, Truck

Messages Page 42 of 46 1 ... 39 40 41 42 43 44 45 46 Prev Next Last

Go To Msg # Search This Discussion

#411 of 460 Re: Is your child OK? [moparbad] by asa Apr 12, 2008 (6:10 pm)
Replying to: moparbad (Apr 05, 2008 8:17 am) Gotta agree with moparbad on the structural integrity of the new Gen Frontiers. Crawl under one and you'll see a very stout frame; it is indeed borrowed from Titan's specifications. If the frame was severely bent, something more than a light pole could also have truck paint on it.
#412 of 460 Re: 2008 Frontier SE Crew Cab - Car Accident [upsetmommy] by obyone Apr 13, 2008 (12:39 pm)
Replying to: upsetmommy (Apr 03, 2008 6:12 pm) Yo mommy, returning for an answer? Bottom line what you describe is impossible with either the Frontier or the Titan. Backing up into a pole will not cause the truck to be totaled unless of course the pole fell on the truck. Somethings fishy here and its not with the truck.
#413 of 460 1995 Nissan Pick Up by 4primadonna Apr 23, 2008 (5:25 pm)
Could someone tell me what's wrong or causing the 1995 Nissan Pick up to overheat when the water pump and thermostat are newly replaced? At first, we thought, the parts were defective so we exchanged with a new one, but still after driven today, it still leaking/overheating. Pls. advise. Thanks. Replies to this message: obyone (Apr 26, 2008 2:27 am) 4primadonna (Apr 28, 2008 5:30 pm)
#414 of 460 Re: 1995 Nissan Pick Up [4primadonna] by obyone Apr 26, 2008 (2:27 am)
Replying to: 4primadonna (Apr 23, 2008 5:25 pm) How old is the radiator? When was it last flushed? Replies to this message: 4primadonna (Apr 28, 2008 5:30 pm)
#415 of 460 Re: 1995 Nissan Pick Up [obyone] by 4primadonna Apr 28, 2008 (5:30 pm)
Replying to: obyone (Apr 26, 2008 2:27 am) Thanks for responding. My husband figured out it's the radiator so we're replacing it with a new one and hopefully the problem solved. Do appreciate your quick respond to my e-mail. God Bless you and your family. Thanks a lot again. Take care.
#416 of 460 1995 Nissan Pick-up by 4primadonna May 08, 2008 (3:36 pm)
Hubby just replaced new radiator/water pump/thermostat on his Nissan P/up and yet it's still giving him problem. Sometimes, thermostat not working right, and water is overflowing/leaking over the radiator. Took at the auto repair and mechanic didn't find anything wrong-Is there anything else that he should be checking or replacing parts that he's not aware of? P/U is really in good condition body/engine looks very clean but it's been acting up lately. Need advise from someone out there who really knows and expert on the maintenance and repair on Nissan P/Ups. Do appreciate the advise or ideas. Thank you. Replies to this message: obyone (May 08, 2008 3:50 pm)
#417 of 460 Re: 1995 Nissan Pick-up [4primadonna] by obyone May 08, 2008 (3:50 pm)
Replying to: 4primadonna (May 08, 2008 3:36 pm) While he replaced the radiator, water pump, and thermostat he did not appear to backflush the engine to rid it of any contaminants or BLOCKAGES. If he has the equipement fine, if not take it to a radiator shop and have it backflushed with a water gun pressurized by an air compressor.
#418 of 460 Key Release Button by stavner May 16, 2008 (3:39 pm)
Where is the key release button located on the 1995 Nissan pickup truck? The manual says I have one, but it doesn't show where it is. Replies to this message: obyone (May 17, 2008 11:23 pm)
#419 of 460 Re: Key Release Button [stavner] by obyone May 17, 2008 (11:23 pm)
Replying to: stavner (May 16, 2008 3:39 pm) The regular key button is located next to the key. If you're talking about the overide button in case the ignition doesn't release your key it is located in the steering column.
#420 of 460 Check Engine light and error codes by warney Jun 06, 2008 (9:30 pm)
1996 Nissan King Cab XE 2.4L, manual transmission, 2wd, manufactured 6-96, 155,000 miles. Check engine light came on, went to Autozone and they plugged in the code reader which came up PO136, Oxygen Sensor 2, bank 1. Didn't have the sensor in stock so the error was reset and all good for a few days. Check engine light comes on again so back to Autozone, the fellow plugs in the code reader again and gets PO135, Oxygen sensor 1 bank 1, and some purge control valve error code, I forget the number. I am thinking something is not making a good connection for this thing to be giving all the error codes, called a trusted mechanic and he said to "check the fuse" which I will do. Oddly, PO136 didn't come up this time. I think there is a connector that needs some contact cleaner and would rather test that theory than start hanging new expensive parts on the Truck. Anyone any ideas what to do or where to look? I can see plenty of bad looking splices and butt connectors on the engine wiring harness, not good. Please advise any thoughts.

Messages Page 42 of 46 1 ... 39 40 41 42 43 44 45 46 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Nissan Frontier Nissan Pickups Maintenance and Repair