Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Smart Shopper Stories from the Sales Frontlines
48041 messages, Last post on Dec 03, 2009 at 4:56 AM
You are in the Smart Shopper Forum. Your Hosts are kirstie_h & tidester
|
|
|---|---|
|
Replying to: snakeweasel (Sep 15, 2006 12:06 pm) now I have to mar the bumper on my Imp because I moved to a 2 plate state IMO I think 2 plates are dumb... I know I'll get flamed but I do. |
|
|
Replying to: british_rover (Sep 15, 2006 12:14 pm) Nope - Mass went back to 2 plates about 8 years ago. The old green single plates should be turned in.
|
|
|
Replying to: the_big_al (Jun 27, 2008 3:16 pm) No, I feel the same. The rear of most vehicles is invariably designed to incorporate a standard sized plate, complete with illumination. In other words it looks right. The front end however, especially on todays rounded 'aero' designs, is rarely shaped to accomodate one. Even when a moulded plate holder is available, it almost always looks like an afterthought (to me anyway). |
|
|
Replying to: snakeweasel (Sep 15, 2006 12:06 pm) Pennsylvania. However, in my opinion all states should have both front and rear plates, given all the car related crimes that are committed. jmonroe |
|
|
|
|
Replying to: robr2 (Sep 15, 2006 12:16 pm) |
|
Same thing with my CR-V.. dealer put two screw holes in the front, that wouldn't be there, otherwise...
|
|
|
Replying to: kyfdx (Sep 15, 2006 12:31 pm) My G35 had a bracket that didn't require holes in the bumper, but the dealer put on a dealer tag with screws that were too long and left nice black 1/4 holes from the flat end of the screws. That isn't the first time that has happened to me either, but I have never had the marbles to cancel an entire deal over it. |
|
|
Replying to: kyfdx (Sep 15, 2006 12:31 pm) |
|
|
|
|
Replying to: the_big_al (Jun 27, 2008 3:16 pm) May I ask why?
|
|
|
|
|
Replying to: snakeweasel (Sep 15, 2006 12:36 pm) That is the biggest reason - If automakers would design there fronts to incorporate a plate like they do the rears it wouldn't look half as bad...
|
|
You are here:
Forums
Smart Shopper Stories from the Sales Frontlines
