Last post on Jul 24, 2013 at 5:22 PM
You are in the Chevrolet Cavalier
What is this discussion about?
Chevrolet Cavalier, Transmission, Coupe
#13 of 34 Dyeing Auto tranny, possible conversion?
Oct 14, 2008 (11:25 pm)
I have a 1998 Chevy Cavalier Z24 with a 2.4L twin cam, and I am pretty sure the automatic transmission is going on it. Would it be cheaper to get the parts out of a junker manual Cavalier of the same type and do a Manual Conversion, or get a new automatic transmission? I really don't like driving automatic, and I don't want to get rid of the car because I have put some performance/body mods on it that I don't want to try take off. I know it's not too difficult to do a swap, but is it cheaper?
#14 of 34 possible tranny problems?
Nov 13, 2008 (4:50 pm)
i have a 1996 cavalier and i know it needs a new clutch but now reverse is gone it has more room then it should for the shifter to move when in reverse position.. i have been told its because of the clutch. i have also been told that its something internally in the tranny because the other gears are fine. does anyone know what may be causing this?
Nov 16, 2008 (4:11 pm)
2000 chevy cavalier z24 2.4L can i change the manual transmission to automatic. if so what parts will be needed?
#16 of 34 Re: possible tranny problems? [rodger9440]
Dec 19, 2008 (2:26 pm)
#17 of 34 Re: possible tranny problems? [Too2fast4u]
Dec 27, 2008 (11:20 am)
any idea what it is internally? will the part or parts be exspensive?
#18 of 34 Clutch Woes
Jun 26, 2009 (2:04 pm)
#19 of 34 Clutch Woes
Jun 26, 2009 (2:04 pm)
My daughter's 03 Cav has a clutch issue. The pedal goes to the floor even when bled. There's clutch fluid coming from the tanny case bottom so I guess it is the slave cyl. I know the tranny has to come out to replace this (way to go GM engineering !). I have a replacement but my question is- is this prefilled from the factory with fluid ? If i push down on the little plastic pin should the throw out brg move ?./ The only bleed nipple is on the outside of the tranny case so how do you bleed the slave cyl itself ?
Sep 27, 2009 (7:33 pm)
I have a 98 Cavalier that all of a sudden the clutch only engages when the pedal is almost on the floor and it must not be completly engaing because it doesn't want to shift. Any ideas? Also anyone here change a clutch on one of these? How bad is it?