Sign In Join 



Toyota Corolla Audio Questions

160 messages,  Last post on Sep 11, 2009 at 6:44 AM

You are in the Toyota Corolla Forum. Your Hosts are pat & karens

What is this discussion about? Toyota Corolla, Audio, Sedan


Messages Page 1 of 16
1
2
3
4
5
6
7
...
16
Prev
Next
Last
Go To Msg #
Search This Discussion

#1 of 160
Rear speaker installation.. HELP! by jonathan76
Jan 23, 2006 (1:41 am)
Reply
Can anyone tell me how to access the rear speakers in a 2000 toyota corolla sedan? I bought some new speakers but I can't even figure out how to take the old ones out! Anyone that knows how to change em out would be of great help. Thanks!
#3 of 160
wiring color codes for stereo/radio on 97 corolla by elmer68
Jun 15, 2006 (7:20 pm)
Reply
I need the Color codes for a 1997 Corolla SE. I am trying to replace the In-Dash Car radio with a cd/mp3 player. i pulled the old radio out and find out that it has a 2 harness system, the new one only has one. is there an adapter available for this or i need to rewire??
 
please help
#4 of 160
2006 radio removal by bscott3
Jun 21, 2006 (10:03 am)
Reply
Does anyone know how to remove the radio from a 2006 Corolla S?
#5 of 160
MP3 by magan
Jul 19, 2006 (4:37 am)
Reply
Is there a kit to wire in an MP3 adapter for a 2005 Corolla?
#6 of 160
you must by toyotaautofam
Aug 02, 2006 (12:25 pm)
Reply
there is 4 parts you must remove before you can remove the radio, Get with me for step by step insrections.
#8 of 160
Re: MP3 [magan] by antithesis
Aug 13, 2006 (8:26 am)
Reply

Replying to: magan (Jul 19, 2006 4:37 am)

I believe their is an auxiliary input adapter that uses the cd changer input on the head unit to feed in a left and right channel only. So you can get line level in but no readout on the radio. I am looking at getting one for adding XM.
#9 of 160
Re: 2006 radio removal [bscott3] by tomgee
Aug 17, 2006 (4:33 am)
Reply

Replying to: bscott3 (Jun 21, 2006 10:03 am)

I just removed the factory radio from a 2006 Corolla LE to install an external audio input line for my Archos MP3 player. The radio is a Toyota factory AM/FM with CD changer.
 
The steps:
 
1. disconnect battery lead because of air bag sensors
2. pop off trim around shifter stick
3. remove center knob on the A/C panel. Remove phillips screw behind the knob. This is the only screw that has to come out (in addition to the 4 radio screws)
4. pull the a/c console forward. It's a tight fit but it's only held by clips. This was the most difficult part for me because I didn't want to break anything. It eventually released after pulling with constant pressure.
5. pull the air vent assembly off around the radio. This is also a tight fit, is only secured with clips. The radio face plate came off with this piece.
6. Remove 4 10mm bolts at bottom of radio. I used putty on a 10mm socket to help hold the bolt from falling down into the dashboard. Lose these bolts and you'll easily add several hours to the job trying to fish them out of the dashboard.
The radio slides right out. Total time to remove radio, add an external audio input and put it back together was about one hour.

Messages Page 1 of 16
1
2
3
4
5
6
7
...
16
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement