You are here: Forums SUVs Ford Bronco Ford Bronco Problems

Ford Bronco Problems

231 messages,  Last post on Nov 21, 2009 at 2:24 AM

You are in the Ford Bronco Forum. Your Hosts are steve_ & tidester

What is this discussion about? Ford Bronco

Messages Page 2 of 24 1 2 3 4 5 6 7 ... 24 Prev Next Last

Go To Msg # Search This Discussion

#9 of 231 Re: 1991 Bronco [qftball] by dubbayoudot Apr 11, 2006 (7:22 pm)
Replying to: qftball (Mar 22, 2006 10:45 pm) I am having the same exact problem, and I was wondering if you got the o-rings replaced. I would really appreciate any advice you might have. Thanks. Replies to this message: qftball (Jun 06, 2006 8:05 pm)
#10 of 231 Re: Speedo sensor [94eddyb] by chev72 May 19, 2006 (4:48 pm)
Replying to: 94eddyb (Feb 18, 2006 9:36 am) hey joe ..I have a 94 5.8 bronco with exactly the same problem. I was wondering if you have found out anything more about the problem.I was going to replace the rear dif sensor but not now since it did not work on yours. THANKS ..JEFF
#11 of 231 96 ford bronco trans questions? ......... by angausshar4 May 27, 2006 (6:56 pm)
I have a 1996 ford bronco 4*4 eddie baurer eddition and I'm havin problems w/ my trans........I can drive it for about 15-20 miles and then it starts pumping fluid out of the the tranny. then after it cools off for a while it will stop leaking and i put more fluid in, its ready for another 15-20 miles. what do you think could be the problem? Replies to this message: 68broncogirl (Jul 08, 2006 9:35 am)
#12 of 231 87 bronco full-size 351 Winsor by broncosnake May 31, 2006 (6:10 pm)
Any body out there own a 87 with a 351 windsor, 4 barrel carb and c-6 tranny that came stock. i need info on setting up vacuum,to egr,exhaust control valve, intake heat control valve and charcoal canister for fuel tank and carb vapors and how it all works. any info will be appreciated. thanks, broncosnake87
#13 of 231 bronco chat rooms? by broncosnake May 31, 2006 (7:23 pm)
Anybody know of any chat rooms or other forums that I could get info on 87 broncos?
#14 of 231 1990 Bronc 5.0 by 90bronc Jun 05, 2006 (9:30 pm)
Driving home the other day the 'tin bitch' died. After getting it towed home we discovered no spark. There is power going to the coil but NO power out of the coil. We changed coils and still no spark...any ideas? Replies to this message: 90bronc (Jun 11, 2006 3:08 pm) cadman5 (Jun 13, 2008 5:51 am)
#15 of 231 Re: Ford Bronco Problems [93ebfbronco] by 90bronc Jun 05, 2006 (9:32 pm)
Replying to: 93ebfbronco (Jan 04, 2006 4:18 pm) I had a vibration in the rear of my Bronc....turned out to be the U joints....u have 4X4? check the joints
#16 of 231 Re: 1991 Bronco [dubbayoudot] by qftball Jun 06, 2006 (8:05 pm)
Replying to: dubbayoudot (Apr 11, 2006 7:22 pm) they told me that i needed to replace the o rings but no one will replace just one they want to do them alll for like 500 bucks what so i just bought Lucas transmission seal from the auto parts store and it lubricated the seal enough that it has never leaked again .
#17 of 231 TFI by 90bronc Jun 10, 2006 (9:19 am)
ANyone know what tool I need to remove the TFI from a 90 302?...I tried everything and can't get a tool that fits..is it a 7/32 socket? my sockets are too short...help pls!
#18 of 231 Re: 1990 Bronc 5.0 [90bronc] by 90bronc Jun 11, 2006 (3:08 pm)
Replying to: 90bronc (Jun 05, 2006 9:30 pm) Thanks for the help guys, the problem was indeed the Ignition control module...

Messages Page 2 of 24 1 2 3 4 5 6 7 ... 24 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Ford Bronco Ford Bronco Problems